• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-26 23:57来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 Subtask 52-32-00-720-052
 C. Clearance Check of the Locking Hooks
 (Ref. Fig. 501A/TASK 52-32-00-991-001)

 (1)
 Open the cargo door (Ref. TASK 52-30-00-860-001) until it is in the vertical position.

 (2)
 Remove the access panel 826AR to get access to the locking hooks of the closed cargo doors.

 (3)
 Set the selector of the control panel to the CLOSED position and hold it during the clearance check.


 NOTE : This operation is necessary to keep the cargo door in the
____ fully closed position when it is not locked.
 (4) Do this test:
 NOTE : If necessary, adjust the position of the released locking
____
 hooks (Ref. TASK 52-32-11-820-002).

R 1EFF : 001-049, 051-099, 101-149, 201-299, 1 52-32-00Page 535 1301-399, 1Aug 01/05 1 1 1CES 1


 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
1. Between the cargo door and the  Between the cargo door and the cargo cargo door sill: door sill:
 -
measure the clearance between  - the minimum clearance must be 2.0 mm the rear of the locking hooks (0.0787 in.). and the door sill structure.

 -
measure the clearance between  - the minimum clearance must be 3.0 mm the top of the locking hook and (0.1181 in.). the roller of the lock fitting.


 (5) Make sure that the cargo door is correctly closed and locked (Ref. TASK 52-30-00-860-002) when the test is completed.
 (6) Install the access panel 826AR. R **ON A/C 151-199, 401-499,
 Subtask 52-32-00-720-052-B
 C. Clearance Check of the Latching Hooks
 (Ref. Fig. 501B/TASK 52-32-00-991-001-C)

 (1)
 Open the cargo door (Ref. TASK 52-30-00-860-001) until it is in the vertical position.

 (2)
 Remove the access panels 826AR, 826BR and 826CR to get access to the latching hooks of the closed cargo door.

 (3)
 Set the selector of the control panel to the CLOSED position and hold it during the clearance check.


 NOTE : This operation is necessary to keep the cargo door in the
____ fully closed position when it is not latched.
 (4) Do this test: NOTE : If necessary, adjust the position of the released latching
____
 hooks (Ref. TASK 52-32-11-820-002).

R 1EFF : 051-052, 151-199, 401-499, 1 52-32-00Page 536 1 1 Aug 01/05 1 1 1CES 1


 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
1. Between the cargo door and the  Between the cargo door and the cargo cargo door sill: door sill:
 -
measure the clearance between  - the minimum clearance must be 2.0 mm the rear of the latching hooks (0.0787 in.). and the door sill structure.

 -
measure the clearance between  - the minimum clearance must be 3.0 mm the top of the latching hook (0.1181 in.). and the roller of the latch fitting.

 (5)
 Make sure that the cargo door is correctly closed and locked (Ref. TASK 52-30-00-860-002) when the test is completed.

 (6)
 Install the access panels 826AR, 826BR and 826CR.

 


 **ON A/C 001-049, 053-061, 101-105, 201-203,
 Subtask 52-32-00-720-053-A
 D. Check of the Proximity Switches 32WV, 34WV and 12MJ
 (Ref. Fig. 503/TASK 52-32-00-991-003-A)

 (1)
 Make sure that the cargo door is correctly closed and locked (Ref. TASK 52-30-00-860-002).

 (2)
 Remove the access panel 826AR to get access to the applicable proximity switches.

 (3)
 Do this test:


 NOTE : If necessary, adjust the clearance of
____
 -
the proximity switches 34WV (Ref. TASK 52-71-12-400-001),

 -
the proximity switches 32WV (Ref. TASK 52-71-12-400-002),

 -
the proximity switches 12MJ (Ref. TASK 52-35-13-400-002).


R 1EFF : 001-049, 053-061, 101-105, 151-199, 1 52-32-00Page 537 1201-203, 401-499, 1Aug 01/05 1 1 1CES 1


 Check of the Proximity Switches 32WV, 34WV and 12MJ Figure 503/TASK 52-32-00-991-003-A
 1EFF : 001-049, 053-099, 101-105, 201-220, 1 52-32-00Page 538 1 1 May 01/05 1 1 1CES 1


 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the proximity switches 34WV:  On the proximity switches 34WV:
 - measure the clearance between  - the clearance must be between 1.6 mm
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM DOORS 舱门5(14)