(7)
Remove the nut (6) and the bush (5).
(8)
Remove the bolt (32) and the bush (33).
(9)
Remove the eccentric yoke (8), the washer (13) and the roller (11).
(10)
Remove the nut (2) and the washer (1).
(11)
Remove the bolt (37) and the washer (38).
(12)
Remove the lever (18) and the shouldered bushes (15) and (24).
(13)
Remove the spacer (25) and the washers (26) and (27).
(14)
Remove the bellcrank assy (22) and the bumper (23).
(15)
Remove the spring (19).
(16)
Remove the bolt (20) and the washer (21).
(17)
Remove and discard the cotter pin (4).
(18)
Remove the washer (3) and the pin (36).
(19)
Remove and discard the rivet (16), the trunnion (17) and the spring (14).
R 1EFF : 106-149, 155-199, 208-299, 301-399, 1 52-13-31Page 450 1401-499, 1Aug 01/05 1 1 1CES 1 1EFF : ALL 1 52-13-31Page 451 1 1 Nov 01/01 1 1 1CES 1
**ON A/C ALL
TASK 52-13-31-400-006
Installation of the Roller and Proximity Switch Mechanism
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific No specific two shims (thickness 0.2 mm (0.0078 in))positioning templates 70 mm (2.7559 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-001 Material No. 19-010 F AIR-4205 WHEEL BEARING MINERAL GREASE (Ref. 20-31-00)USA AMS 5687 LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA (Ref. 20-31-00)
C. Expendable Parts
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
R R R R 4 4 7 16 16 49 cotter pin cotter pin cotter pin rivet rivet cotter pin 53-46-04 80A-150 53-46-04 80B-150 53-46-04 80B-06053-46-04 80A-210 53-46-04 80B-210 53-46-04 80B-060
D. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power 25-23-46-400-002 Installation of the Door Linings at the AFT
Passenger/Crew Doors 52-10-00-410-001 Closing of the Passenger/Crew Door 52-10-00-860-001 Special Precautions before Work on the Passenger/Crew
Door 52-10-00-860-002 Special Precautions after Work on the Passenger/Crew Door
52-71-00-820-001 Adjustment of the Proximity Switches (11WV1, 11WV2, 15WV1, 15WV2) of the Locking Hook of the Pax/Crew Doors with the CHECKING TOOL-DOOR
52-71-00-820-001 Adjustment of the Proximity Switches (11WV1, 11WV2, 15WV1, 15WV2) of the Locking Hook of the Passenger/Crew Doors with the ECAM DU
**ON A/C 001-049, 051-099, 101-105, 151-154, 201-207,
52-13-31-991-019 Fig. 412
R **ON A/C 106-149, 155-199, 208-299, 301-399, 401-499,
52-13-31-991-019-A Fig. 412A
**ON A/C 001-049, 051-099, 101-105, 151-154, 201-207,
52-13-31-991-016 Fig. 413
R **ON A/C 106-149, 155-199, 208-299, 301-399, 401-499,
52-13-31-991-016-A Fig. 413A
1EFF : ALL 1 52-13-31Page 452 1 1 Aug 01/05 1 1 1CES 1
**ON A/C ALL
3. Job Set-up
__________
Subtask 52-13-31-860-053
A. Aircraft Maintenance Configuration
(1)
Make sure that the access platforms are in position.
(2)
Make sure that the special precautions are obeyed (Ref. TASK 52-10-00-860-001).
(3)
Make sure that the drain holes in the door structure are not obstructed.
(4)
Make sure that the parts retained from the removed component are clean and in the correct condition.
Subtask 52-13-31-865-068
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门3(9)
