• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-26 23:52来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者


R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 52-21-00Page 529 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 PASSENGER COMPARTMENT EMERGENCY EXIT - INSPECTION/CHECK


_______________________________________________________
 TASK 52-21-00-200-001
 Detailed Visual Inspection of the Emergency Exits, Internal Structure and Load Transmitting Profile LH/RH
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 522102-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific masking paper No specific masking tape No specific wooden or plastic scraper
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 15-005  AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
 Material No. 15-006  AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 52-21-00Page 601 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1


 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-23-47-000-001 Removal of the Lining from the Emergency Exit Hatches 25-23-47-400-001 Installation of the Lining on the Emergency Exit Hatches 51-73-11-300-002 Repair of Minor Damage on Titanium, Forged Aluminum,
 or Steel Components 51-74-11-300-001 Repair of Corroded Areas 51-75-12-300-001 Repair of Major Paint Damage on Light Alloy and
 Composite Material 52-21-11-000-001 Removal of the Emergency Exit Hatch 52-21-11-400-001 Installation of the Emergency Exit Hatch ASRM 52-20-00-201 52-21-00-991-005 Fig. 601
 3. Job Set-up
__________
 Subtask 52-21-00-010-054
 A. Get Access
 (1)
 Remove the emergency exit hatch (Ref. TASK 52-21-11-000-001).

 (2)
 Remove the hatch lining from the emergency exit hatch (Ref. TASK 25-23-47-000-001).

 (3)
 Carefully disengage the VELCRO tapes and remove the insulation packs.


 4. Procedure
_________
 Subtask 52-21-00-220-050
 A. Detailed Visual Inspection of the Emergency Exits, Internal Structure and Load Transmitting Profile LH/RH (Ref. Fig. 601/TASK 52-21-00-991-005)
 (1) Examine the subsequent components of the hatch structure for corrosion, scratches, marks and dents:
 -
the inside framing (edge beams and edge curves),

 -
the beam framing (horizontal beams, vertical frame segments and window frame).

 -
the LH/RH load transmitting profile


R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 52-21-00Page 602 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1


 Hatch Structure
 Figure 601/TASK 52-21-00-991-005

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 52-21-00Page 603 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 NOTE : Dents are not permitted on these components.


____
 (2)
 If you find a damage, continues as follows:

 (a)
 Determine the limits of the allowable damage (Ref. ASRM 52-20-00-201).

 (b)
 Repair the scratches and marks (Ref. TASK 51-73-11-300-002).

 (c)
 Repair the corrosion (Ref. TASK 51-74-11-300-001).

 

 (3)
 Make a general inspection of the emergency exits:

 (a)
 Examine the drain holes at the bottom of the hatch structure to make sure that they are not blocked.

 (b)
 Examine all rivets of the hatch structure.

 -
If you find an empty rivet hole, install the rivet with the correct sealant.

 -
If you find damaged or loose rivets, replace them.

 

 (c)
 Examine the sealant of all structure components for the correct condition. If necessary, remove the old sealant with a wooden or plastic scraper and apply new sealant.

 (d)
 Make sure that all attachment screws and bolts of the hatch structure are correctly tightened.

 (e)
 Make sure that the paint is in the correct condition (Ref. TASK 51-75-12-300-001).

 


 Subtask 52-21-00-916-050
 B. Application of Temporary Protection
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM DOORS 舱门3(26)