1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific lintfree cloth
No specific masking paper
No specific masking tape
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-027 USA MIL-L-81309 R RUST INHIBITOR(FOR CORROSION USE 15-004) R (Ref. 20-31-00)
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
3. Job Set-up
__________ Subtask 51-75-13-941-050
A. Get access to the area to be repaired.
4. Procedure
_________ Subtask 51-75-13-110-050
A. Repair a layer of Moisture-Removing Oil
WARNING : USE ONLY THE SPECIFIED TOOLS FOR THE PROTECTION OF THE
_______ AIRCRAFT. DO NOT APPLY ADHESIVE TAPE ON THE PROBES, DUCTS, SENSORS (STATIC, PITOT, TAT, AOA). THE SPECIFIED TOOLS :
-GIVE THE CORRECT PROTECTION TO THE AIRCRAFT EQUIPMENT,
-ARE EASY TO SEE FROM THE GROUND. MAKE AN ENTRY IN THE AIRCRAFT LOG BOOK OR ATTACH A TAG ON THE CAPTAIN SIDE STICK TO TELL THE CREW THAT PROTECTION COVERS/DEVICES ARE INSTALLED.
(1) Cover the equipment and fittings adjacent to the area with masking paper and masking tape.
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
SPECIAL MATERIAL.
THIS MATERIAL IS DANGEROUS.
(2)
Clean the area with CLEANING AGENTS (Material No. 11-004) and a lintfree cloth.
(3)
Apply a layer of SPECIAL MATERIALS (Material No. 05-027) to the area.
(4)
Let the moisture-removing oil cure for 1 hour before you apply a second protective layer.
(5)
Remove the masking paper or the masking tape.
5. Close-up
________ Subtask 51-75-13-942-050
A. Remove the ground support and maintenance equipment, the special and standard tools and all other items.
TASK 51-75-13-916-002
Repair to a layer of Corrosion Preventive Compound WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL MATERIALS
_______
ONLY WITH A GOOD SUPPLY OF AIR.
OBEY THE MANUFACTURERS INSTRUCTIONS.
PUT ON PROTECTIVE CLOTHING.
DO NOT GET THEM IN YOUR MOUTH.
DO NOT SMOKE.
DO NOT BREATHE THE GAS.
THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT.
GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific masking paper No specific masking tape R No specific 1 SCRAPER - NON METALLIC
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-005 USA MIL-C-16173 GRADE II
CORROSION PREVENTIVE (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
51-75-13-916-001 Repair to a layer of Moisture-Removing Oil
3. Job Set-up
__________
Subtask 51-75-13-941-051
A. Get access to the area to be repaired.
4. Procedure
_________
Subtask 51-75-13-140-050
R A. Repair of a layer of Corrosion Preventive Compound
WARNING : USE ONLY THE SPECIFIED TOOLS FOR THE PROTECTION OF THE_______ AIRCRAFT. DO NOT APPLY ADHESIVE TAPE ON THE PROBES, DUCTS, SENSORS (STATIC, PITOT, TAT, AOA). THE SPECIFIED TOOLS : - GIVE THE CORRECT PROTECTION TO THE AIRCRAFT EQUIPMENT, - ARE EASY TO SEE FROM THE GROUND. MAKE AN ENTRY IN THE AIRCRAFT LOG BOOK OR ATTACH A TAG ON THE CAPTAIN SIDE STICK TO TELL THE CREW THAT PROTECTION COVERS/DEVICES ARE INSTALLED.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM STANDARD PRACTICES AND STRUCTURES(33)
