3. Job Set-up
__________
Subtask 51-23-00-860-052
A. Aircraft Maintenance Configuration
(1)
Depressurize the Green, Yellow and Blue hydraulic systems:
-
Depressurize the Green hydraulic system (Ref. TASK 29-10-00-864-001)
-
Depressurize the Yellow hydraulic system (Ref. TASK 29-10-00-864-002)
-
Depressurize the Blue hydraulic system (Ref. TASK 29-10-00-864-003)
(2)
Put a WARNING NOTICE in position to tell persons not to operate the flight controls.
(3)
Put a WARNING NOTICE in position to tell persons not to pressurize the hydraulic systems: - on the panel 40VU in the cockpit - on the ground service panels of the Green, Yellow and Blue
hydraulic systems.
Subtask 51-23-00-865-052
B. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FLIGHT CONTROLS/ELAC1/NORM/SPLY 15CE1 B11 105VU FLIGHT CONTROLS/ELAC2/STBY SPLY 16CE2 A02 105VU FLT CTL/ELAC1/STBY SPLY 16CE1 A01 121VU FLIGHT CONTROLS/ELAC2/NORM/SPLY 15CE2 R20
Subtask 51-23-00-010-051
C. Get Access
(1) Put a ACCESS PLATFORM 4M (13 FT) in position:
-
at zone 500 for the left hand wing
-
at zone 600 for the right hand wing.
4. Procedure
_________
(Ref. Fig. 205/TASK 51-23-00-991-005)
Subtask 51-23-00-916-052
A. Application of the Protective Coating
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
WARNING : DO NOT GET THE COMPOUND ON YOUR SKIN._______ IF YOU DO: - RUB IT OFF IMMEDIATELY WITH A CLEAN CLOTH - WASH THE SKIN WITH SOAP AND RINSE WITH CLEAN WATER.
R R R R (1) Apply the materials that follow in the given sequence to the area E1: - CAA UNSEALED - BR127
R R R R R (2) Apply the materials that follow in the given sequence to the areas E2, E4, E5, E8, E9 and E11: - CAA UNSEALED - STRUCTURE PAINTS (Material No. 16-006B) / STRUCTURE PAINTS (Material No. 16-006C)
R R R (3) Apply the material that follows to the area E13: - STRUCTURE PAINTS (Material No. 16-006B) / STRUCTURE PAINTS (Material No. 16-006C)
R R NOTE : Protective coating is not necessary on the areas E3, E6, E7,____ E10 and E12.
Paint and Protective Coatings - Wing Areas
Figure 205/TASK 51-23-00-991-005
1EFF : ALL 1 51-23-00 Page 227
1 1 Feb 01/04
1 1
1CES 1
Subtask 51-23-00-370-052
B. Application of the Paint
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
WARNING : DO NOT GET THE COMPOUND ON YOUR SKIN._______ IF YOU DO: - RUB IT OFF IMMEDIATELY WITH A CLEAN CLOTH - WASH THE SKIN WITH SOAP AND RINSE WITH CLEAN WATER.
R R R R R (1) Apply the materials that follow in the given sequence to the area E2: - STRUCTURE PAINTS (Material No. 16-020) - STRUCTURE PAINTS (Material No. 16-001) - STRUCTURE PAINTS (Material No. 16-018)
R R R R R R (2) Apply the materials that follow in the given sequence to the area E3: - BONDING AND ADHESIVE COMPOUNDS (Material No. 08-008) - STRUCTURE PAINTS (Material No. 16-006B) / STRUCTURE PAINTS (Material No. 16-006C) - STRUCTURE PAINTS (Material No. 16-020) - STRUCTURE PAINTS (Material No. 16-001) - STRUCTURE PAINTS (Material No. 16-018)
R R R (3) Apply the material that follows to the area E4: - STRUCTURE PAINTS (Material No. 16-018)
R R R R (4) Apply the materials that follow in the given sequence to the area E5: - STRUCTURE PAINTS (Material No. 16-020) - STRUCTURE PAINTS (Material No. 16-001) - PAINTS FOR DETAIL (INTERNAL AND EXTERN AL) (Material No. 07-004)
R R R R (5) Apply the materials that follow in the given sequence to the area E6: - BONDING AND ADHESIVE COMPOUNDS (Material No. 08-008) - STRUCTURE PAINTS (Material No. 16-006B) / STRUCTURE PAINTS (Material No. 16-006C) - STRUCTURE PAINTS (Material No. 16-020)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM STANDARD PRACTICES AND STRUCTURES(14)
