A. Repair the Paint Damage WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE SPECIAL
_______
MATERIAL.
THIS MATERIAL IS DANGEROUS.
(1) Clean the repair area with CLEANING AGENTS (Material No. 11-001) and a lint-free cloth.
WARNING : USE ONLY THE SPECIFIED TOOLS FOR THE PROTECTION OF THE
_______ AIRCRAFT. DO NOT APPLY ADHESIVE TAPE ON THE PROBES, DUCTS, SENSORS (STATIC, PITOT, TAT, AOA). THE SPECIFIED TOOLS :
-GIVE THE CORRECT PROTECTION TO THE AIRCRAFT EQUIPMENT,
-ARE EASY TO SEE FROM THE GROUND. MAKE AN ENTRY IN THE AIRCRAFT LOG BOOK OR ATTACH A TAG ON THE CAPTAIN SIDE STICK TO TELL THE CREW THAT PROTECTION COVERS/DEVICES ARE INSTALLED.
(2)
If necessary, repair the corrosion damage (Ref. TASK 51-74-11-300-001).
(3)
Cover the area adjacent to the damage with the masking paper and masking tape.
NOTE : If you must repair paint damage adjacent the AOA sensor, you
____ must install COVER - ALPHA PROBE PROTECTIVE (98D53103000000).
(4)
Remove the damaged paint and primer coatings with abrasive cloth grade 280.
(5)
Feather the edges of the undamaged paint to give a smooth surface to the repair area.
(6)
Clean the repair area with CLEANING AGENTS (Material No. 11-004) and a lint-free cloth.
(7)
Apply the primer coatings and paint coatings to the repair area.
(8)
Remove the masking paper, masking tape and protective covers as necessary.
5. Close-up
________
Subtask 51-75-12-942-050
A. Remove the ground support and maintenance equipment, the special and standard tools and all other items.
TASK 51-75-12-300-002
Repair of Major Paint Damage on Steel Component
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific abrasive cloth grade 280
No specific lint-free cloth
No specific masking paper
No specific masking tape
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
Material No. 05-042 USA MIL-C-10578 TYPE II PHOSPHATIC LIQUID (Ref. 20-31-00) Material No. 11-001 USA MIL-D-16791 TYPE I R DETERGENT (Ref. 20-31-00)
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
51-75-13-916-003 Repair to a layer of Cold Phosphate
ASRM 512311000
3. Job Set-up
__________ Subtask 51-75-12-941-051
A. Get access to the area to be repaired.
4. Procedure
_________ Subtask 51-75-12-350-053
A. Repair the Paint Damage WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE SPECIAL
_______
MATERIAL.
THIS MATERIAL IS DANGEROUS.
(1) Clean the repair area with CLEANING AGENTS (Material No. 11-001) and a lint-free cloth.
WARNING : USE ONLY THE SPECIFIED TOOLS FOR THE PROTECTION OF THE
_______ AIRCRAFT. DO NOT APPLY ADHESIVE TAPE ON THE PROBES, DUCTS, SENSORS (STATIC, PITOT, TAT, AOA). THE SPECIFIED TOOLS :
-GIVE THE CORRECT PROTECTION TO THE AIRCRAFT EQUIPMENT,
-ARE EASY TO SEE FROM THE GROUND. MAKE AN ENTRY IN THE AIRCRAFT LOG BOOK OR ATTACH A TAG ON THE CAPTAIN SIDE STICK TO TELL THE CREW THAT PROTECTION COVERS/DEVICES ARE INSTALLED.
(2)
Cover the area adjacent to the damage with the masking paper and masking tape.
(3)
If necessary, repair the corrosion damage (Ref. SRM 51-74-00).
(4)
If necessary repair the minor damage (Ref. SRM 51-73-00).
(5)
Remove the damaged paint and primer coatings with abrasive cloth grade 280.
(6)
Feather the edges of the undamaged paint to give a smooth surface to the repair area.
(7)
Clean the repair with CLEANING AGENTS (Material No. 11-004) and a lint-free cloth.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM STANDARD PRACTICES AND STRUCTURES(31)
