R 1EFF : 106-149, 301-399, 401-499, 1 23-73-00Page C591 1 1 Aug 01/05 1 1 1CES 1 **ON A/C 301-399,
 Subtask 23-73-00-865-206
 C. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------
PANEL SERVICE IDENT. LOCATION
 -------------------------------------------------------------------------------
2001VU CIDS/DEU A NORM/ MID/ LH 197RH C04
 2001VU CIDS/DEU A NORM/ MID/ RH 198RH C05
 2001VU CIDS/DEU A NORM/ AFT/ LH 173RH C06
 2001VU CIDS/DEU A NORM/ AFT/ RH 174RH C07
 2001VU CIDS/DEU B NORM/ AFT 194RH C08
R **ON A/C 106-149, 301-399, 401-499,
 4. Procedure
_________
 Subtask 23-73-00-710-298
 A. Do this test:
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the CFDS-MCDU:  On the CFDS-MCDU: 
 - push the MCDU MENU pushbutton  - the MCDU MENU page comes on. 
 switch. 
 - push the CFDS related line  - the CFDS page comes on. 
 select key. 
 - push the SYSTEM REPORT/TEST  - the SYSTEM REPORT/TEST page comes on. 
 line select key. 
 - push the COM related line  - the SYSTEM REPORT/TEST COM page comes 
 select key.  on. 
 - push the CIDS1 related line  - the CIDS1 main menu page comes on. 
 select key. 
R 1EFF : 106-149, 301-399, 401-499, 1 23-73-00Page C592 1 1 Aug 01/05 1 1 1CES 1
 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-
push the OP TESTS line select key.
 -
push the READING LT + ACP + PAX CALL + SIGN LAMPS ACTIVATION line select key.
 2. On the CFDS-MCDU: 
-push the RETURN line select key until the SYSTEM REPORT/TEST page comes on. 
3. On the CFDS-MCDU: 
-push the MCDU MENU pushbutton switch.
 5. Close-up
________ Subtask 23-73-00-860-166
-
the CIDS1 OP TESTS page comes on.
-
the CIDS1 OP TEST OF LAMPS page comeson,
 -
the READING LT + ACP + PAX CALL + SIGN LAMPS ACTIVATED message is shown.
In all cabin areas and in all lavatories:
 -
the lamps of all reading lights, ACPs, passenger call signs and other sings come on.
In all cabin areas and in all lavatories:
-
the lamps of all reading lights,ACPs, passenger call signs and othersigns go off.
On the CFDS-MCDU:
-
the MCDU MENU page comes on.
 A. Put the aircraft back to its initial configuration.
 (1)
 Do the EIS stop procedure
 (Ref. TASK 31-60-00-860-002)
 (2)
 De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002)
R 1EFF : 106-149, 301-399, 401-499, 1 23-73-00Page C593 1 1 Aug 01/05 1 1 1CES 1 TASK 23-73-00-710-037
 Operational Test of the Cabin Signs via MCDU
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 237300-07
 To verify passenger lighted signs operation.
 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 31-32-00-860-003 Procedure to Get Access to the SYSTEM REPORT/TEST/COM
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM Communications 通讯4(80)