• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-20 21:18来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

No specific  cable tie
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 24-41-00-862-002  Energize the Aircraft Electrical Circuits from the External PowerDe-energize the Aircraft Electrical Circuits Supplied from the External Power 
R  **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 
R  23-73-44-991-006-A  Fig. 401

 

 -------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
R  **ON A/C 106-149, 301-399, 401-499, 
R R 23-73-44-991-006  Fig. 401A 
**ON A/C ALL
 3. Job Set-up__________ Subtask 23-73-44-861-051
 A. Make sure that the aircraft electrical circuits are energized. (Ref. TASK 24-41-00-861-002) Subtask 23-73-44-865-051
 B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
R  -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------FOR 130RH 
R  **ON A/C 001-049, 051-099, 101-105, 201-299, 
R R  49VU COM/CIDS/DIR 1 AND 2/ESS **ON A/C 106-149, 401-499,  150RH  G02 
R R  49VU COM/CIDS/DIR ESS/2 **ON A/C 106-149, 151-199, 301-399, 401-499,  157RH  G02 
R  49VU COM DIR ESS/1  150RH  G01

 1EFF : ALL 1 23-73-44Page 409 1 1 Aug 01/05 1 1 1CES 1


 -------------------------------------------------------------------------------
R  PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------**ON A/C 151-199, 301-399, 
R R  49VU COM DIR ESS/2 **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299,  157RH  G02 
R R  121VU COM NAV/CIDS/DIR 1 AND 2/NORM **ON A/C 106-149, 151-199, 401-499,  151RH  M05 
R R  121VU COM NAV/CIDS/DIR NORM/2 **ON A/C 301-399,  156RH  M06 
R R R  121VU COM NAV/CIDS/DIR NORM/2 121VU COM NAV/CIDS/DIR NORM/1 **ON A/C ALL  156RH 151RH  M07 M06 
R  FOR 330RH1, 330RH3, 330RH7, 330RH8, 330RH9, 330RH11, 330RH13, 330RH14 **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-399,
 49VU COM/CIDS/DEU B/ESS **ON A/C 301-399, 153RH  G03
 120VU COM / CIDS / DEU B / NORM FWD **ON A/C 001-049, 051-099, 101-105, 201-299, 193RH  M09
 121VU COM NAV/CIDS/DEU B/NORM  162RH  M07

 1EFF : ALL 1 23-73-44Page 410 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 23-73-44Page 411 1 1 Aug 01/05 1 1 1CES 1


R  -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------**ON A/C 106-149, 151-199, 401-499,
 121VU COM NAV/CIDS/DEU B/NORM **ON A/C 301-399, 162RH  M08
 Subtask 23-73-44-865-062
 C. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
 -------------------------------------------------------------------------------PANEL SERVICE IDENT. LOCATION -------------------------------------------------------------------------------2001VU CIDS/DEU B NORM/ AFT 194RH C08 **ON A/C ALL
 4. Procedure_________
 **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 
R R  (Ref. Fig. 401/TASK 23-73-44-991-006-A) **ON A/C 106-149, 301-399, 401-499, 
R R (Ref. Fig. 401A/TASK 23-73-44-991-006) 
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-299,
 Subtask 23-73-44-420-050 
R  A. Installation of the handset/cradle (1) Clean the component interface and/or the adjacent area. (2) Do an inspection of the component interface and/or the adjacent area.

 

 (3)
 Remove the blanking caps from the electrical connectors.

 (4)
 Make sure that the electrical connectors are clean and in the correct condition.

 (5)
 Put the cable and the connector (8) through the hole of the handset cradle mounting (2).

 (6)
 Install the handset cradle mounting (2) with the washers (6) and the screws (5).

 (7)
 Connect the electrical connector (8).

 (8)
 Install the connected connector (8) on the handset cradle mounting (2).

 (9)
 Install a new cable tie (7).


 (10)
 Install the handset cradle cover (3) with the screws (4) on the handset cradle mounting (2).
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM Communications 通讯4(133)