Subtask 23-73-64-480-050
E. Install the ADJUSTING DEVICE SUPERSEDED BY 8PE004363-10 (3) to the housing of the reading light (2) and turn it clockwise to lock it.
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-299,
Subtask 23-73-64-869-051
F. Aircraft Maintenance Configuration
(1) Make sure that the Cabin Intercommunication Data System (CIDS) is energized (Ref. TASK 23-73-00-861-001).
R (2) On the Forward Attendant Panel (FAP) 120RH, press the MAIN ON and R POWER READ pushbutton.
1EFF : ALL 1 23-73-64Page 414 1 1 Aug 01/05 1 1 1CES 1
Adjustment of the Reading Light
Figure 402/TASK 23-73-64-991-002
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 23-73-64Page 415 1201-299, 1May 01/05 1 1 1CES 1
Adjustment of the Reading Light Figure 402A/TASK 23-73-64-991-002-A
R 1EFF : 106-149, 301-399, 401-499, 1 23-73-64Page 416 1 1 Aug 01/05 1 1 1CES 11. On the PSIU 2040VU and 2041VU:
R **ON A/C 106-149, 301-399, 401-499,
Subtask 23-73-64-869-051-A
F. Aircraft Maintenance Configuration
(1) Make sure that the Cabin Intercommunication Data System (CIDS) is energized (Ref. TASK 23-73-00-861-001).
R R (2) On the sub-panel of the Flight Attendant Panel (FAP) 120RH, push the LIGHTS MAIN ON/OFF pushbutton.
R R (3) On the CABIN LIGHTING page of the FAP, push the R/L button.
R (4) Adjust the convertible seats to the extended position.
(5) At the passenger seats, pull down the folding tables to the normal position.
**ON A/C ALL
4. Procedure_________
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-299,
Subtask 23-73-64-720-050
A. Do this adjustment test.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
-push the related pushbutton switch to on.
NOTE : Do not adjust the angle of
____ the beam light more than 20 degrees in any direction.
On the related reading light:
-
the reading light beam will fall onthe related passenger seat.
On the related reading light:
-
the light points fall to the middleof the leading edge at the relatedseat.
1EFF : ALL 1 23-73-64Page 417 1 1 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
2. On the PSIU 2040VU and 2041VU:
-adjust the beam light with the adjusting device.
3. On the PSIU 2040VU and 2041VU:
-push the related pushbutton switch to off.
4. Do again this procedure on all reading lights.
R **ON A/C 106-149, 301-399, 401-499,
Subtask 23-73-64-720-050-A
A. Do this adjustment test.On the related reading light:
-the reading light goes off.
NOTE : The subsequent adjustment test gives the procedure for one reading
____ light. The procedure is the same for all reading lights.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On one PSIU:
-push the related pushbutton switch to the ON position.
NOTE : Do not adjust the angle of
____ the light beam more than 20 degrees in any direction.
-adjust the light beam with the adjusting device.
On the related reading light:
-the reading light beam falls on therelated passenger seat and/ or the foldind table.
At the passenger seats:
-the folding table is fully illuminated.
1EFF : ALL 1 23-73-64Page 418 1 1 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
R R R R R R NOTE : The light beam has its focus on____ the surface of folding table. This point is directly in front of the passenger and approx. 25% of the distance from the aft table edge to its forward edge.
R (Ref. Fig. 402A/TASK 23-73-64-991-002-A)
R At the attendant seats:
- the light beam points to the middle of the leading edge of the related seat.
- push the related pushbutton switch to the OFF position. - the reading light goes off.
2. Do this adjustment procedure again for all reading lights. - all light beams point to the middleof the leading edge of the related seat.
**ON A/C ALL
5. Close-up________
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM Communications 通讯4(174)
