Subtask 23-72-00-865-052
B. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
122VU DOORS/CKPT/VIDEO/SPLY 15RA T16
1EFF : 216-216, 1 23-72-00Page 505 1 1 May 01/03 1 1 1CES 1 **ON A/C 216-216,
4. Procedure
_________ **ON A/C 216-216, Post SB 23-1208 For A/C 216-216, Subtask 23-72-00-740-050
A. BITE Test of the Anti-Hijack Camera-Monitoring-System
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. In the cockpit, on the panel 27VU: - push the CKPT DOOR VIDEO pushswitch. In the cockpit:- the OFF legend in the CKPT DOOR VIDEOpushswitch goes off.
In the cockpit, on the LCD: - the green LED comes on (continuously) - the picture from camera 1 shows.
2. In the cockpit, on the panel 119VU: - push and hold the VIDEO pushbutton for 10 seconds. In the cockpit, on the LCD:- the failure history page shows for 60seconds.
3. In the cockpit, on the panel 27VU: - push the CKPT DOOR VIDEO pushswitch one time. On the panel 27VU:- the OFF legend in the CKPT DOOR VIDEOpushswitch comes on.
In the cockpit, on the LCD: - the green LED goes off - the screen goes off.
1EFF : 216-216, 1 23-72-00Page 506 1 1 May 01/03 1 1 1CES 1 **ON A/C 216-216,
5. Close-up
________ **ON A/C 216-216, Post SB 23-1208 For A/C 216-216, Subtask 23-72-00-862-053
A. De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
1EFF : 216-216, 1 23-72-00Page 507 1 1 May 01/03 1 1 1CES 1 1EFF : 216-216, 1 23-72-22Page 401 1 1 Nov 01/04 1 1 1CES 1 1EFF : 216-216, 1 23-72-22Page 402 1 1 Nov 01/04 1 1 1CES 1 1EFF : 216-216, 1 23-72-22Page 403 1 1 Nov 01/04 1 1 1CES 1
MONITOR - COCKPIT DOOR SURVEILLANCE SYSTEM (10RA) - REMOVAL/INSTALLATION________________________________________________________________________
TASK 23-72-22-000-001
R Removal of the Cockpit-Door Surveillance-System Monitor (10RA)
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
R No specific circuit breaker(s) safety clip(s)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power
R **ON A/C 216-216,
R Post SB 23-1208 For A/C 216-216,
R R 23-72-22-991-002 23-72-22-991-001 Fig. 401 Fig. 402
**ON A/C 216-216,
3. Job Set-up__________
**ON A/C 216-216,
Post SB 23-1208 For A/C 216-216,
Subtask 23-72-22-861-050
A. Energize the ground service network (Ref. TASK 24-41-00-861-002)
Subtask 23-72-22-865-050
B. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------122VU DOORS/CKPT/VIDEO/SPLY 15RA T16
R **ON A/C 216-216,
R 4. Procedure_________
R **ON A/C 216-216,
R Post SB 23-1208 For A/C 216-216,
R Subtask 23-72-22-710-051
R R A. Removal of the Monitor or the Hinge Assembly:
R R (1) If you want remove the Monitor only: - Do the paragraph B.
R R (2) If you want remove the Hinge Assembly: - Do the paragraph C.
R Subtask 23-72-22-020-051
R B. Removal of the Monitor
R (Ref. Fig. 401/TASK 23-72-22-991-002)
R (1) Remove the screws (3) from the hinge assembly (2).
R (2) Disconnect the monitor (1).
R (3) Put blanking caps on the connector of the monitor (1).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM Communications 通讯3(34)
