1EFF : ALL 1 23-73-00Page 219 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 301-399,
Subtask 23-73-00-865-148-A
C. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------
PANEL SERVICE IDENT. LOCATION
-------------------------------------------------------------------------------
2001VU CIDS/DEU A NORM/ MID/ LH 197RH C04
2001VU CIDS/DEU A NORM/ MID/ RH 198RH C05
2001VU CIDS/DEU A NORM/ AFT/ LH 173RH C06
2001VU CIDS/DEU A NORM/ AFT/ RH 174RH C07
**ON A/C ALL
4. Procedure
_________
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299,
Subtask 23-73-00-869-063
A. Cabin layout selection
(Ref. Fig. 201/TASK 23-73-00-991-001)
(1)
On the PTP 110RH push the DSPL ON pushbutton switch.
-the CIDS menu page comes on.
(2)
Push the <PROGRAMMING related membrane switch.
-the PROGRAMMING menu page comes on.
(3)
Push the <CABIN PROGRAMMING related membrane switch.
-the ENTER ACCESS CODE page comes on.
(4)
Enter the access code 333 to the scratchpad field and push the <ENTER related membrane switch.
-the CAM LAYOUT SELECT page comes on.
(5)
Push the <CAM LAYOUT SELECT membrane switch.
-the CAM LAYOUT SELECTION menu page comes on.
R 1EFF : ALL 1 23-73-00Page 220 1 1 May 01/05 1 1 1CES 1
Cabin Layout Selection - Example
Figure 201/TASK 23-73-00-991-001
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 23-73-00Page 221 1201-299, 1May 01/05 1 1 1CES 1
(6) Push the related LAYOUT membrane switch.
-the message LAYOUT X LOADED comes on (X shows the selected layout). NOTE : The last selected layout is marked with a flashing < or >.
____
(7) Push the <RET related membrane switch. R **ON A/C 106-149, 301-399, 401-499,
Subtask 23-73-00-869-063-A
A. Cabin layout selection
(Ref. Fig. 201A/TASK 23-73-00-991-001-A)
(1)
On the FAP 120RH push the LAYOUT SELECT key.
-
the LAYOUT SELECT key is illuminated.
-
the LAYOUT SELECTION page with the ENTER ACCESS CODE window comes on.
(2)
On the numeric keyboard enter the access code 318 and push the ENTER key.
-the ENTER ACCESS CODE window disappears.
NOTE : On the LAYOUT SELECTION page, the active layout is marked by
____
an ACTIVE textbox.
(3)
On the LAYOUT SELECTION page push the 'Up' or 'Down' key to select a new layout.
-the selected layout is highlighted by a coloured bar.
(4)
On the LAYOUT SELECTION page push the LOAD key.
-a message box LOADING IN PROGRESS / SYSTEM OPERATION BLOCKED comes on.
-after some seconds the message changes to LAYOUT: CAM X IS LOADED.
(5)
On the message box push the OK key.
-
the message box disappears.
-
the LAYOUT SELECTION page is shown.
1EFF : ALL 1 23-73-00Page 222 1 1 Aug 01/05 1 1 1CES 1
-the new layout is marked by the coloured bar.
(6) On the FAP push the CABIN STATUS key.
-the CABIN STATUS page comes on.
**ON A/C ALL
5. Close-up
________ **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299,
Subtask 23-73-00-869-064
A. Push the DSPL ON membrane switch. R **ON A/C 106-149, 301-399, 401-499,
Subtask 23-73-00-869-064-A
A. Put the aircraft back to its initial configuration.
(1) De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002)
1EFF : ALL 1 23-73-00Page 223 1 1 Aug 01/05 1 1 1CES 1
