-
the CABIN ZONES key is not illuminated anymore.
NOTE : If required, select the next cabin zone or non smoker area for
____
programming before saving the data.
(6)
On the CABIN PROGRAMMING page push the SAVE key.
-a message box with information about the target layout, the date and the new count comes on.
(7)
On the message box push the OK key.
-a message box SAVING IN PROGRESS / FAP BLOCKED comes on.
-after some seconds the message changes to SAVING COMPLETED with layout, count and date information.
(8)
On the message box push the OK key.
-
the message box disappears.
-
the CABIN PROGRAMMING page is shown.
(9)
On the FAP push the CABIN STATUS key.
-the CABIN STATUS page comes on.
Subtask 23-73-00-869-077
B. Programming of Non Smoker Areas
NOTE : The programming of Non Smoker Areas is disabled when the A/C is in
____
the NON SMOKER A/C configuration.
R **ON A/C 106-149, 401-499,
(Ref. Fig. 207/TASK 23-73-00-991-012)
**ON A/C 301-399,
(Ref. Fig. 207A/TASK 23-73-00-991-012-A)
R **ON A/C 106-149, 301-399, 401-499,
(1) On the FAP push the CABIN PROG key.
-
the CABIN PROG key is illuminated.
-
the CABIN PROGRAMMING page with an activated ENTER ACCESS CODE window comes on.
R 1EFF : 106-149, 301-399, 401-499, 1 23-73-00Page 253 1 1 Aug 01/05 1 1 1CES 1
No Smoker Areas Programming - Example
Figure 207/TASK 23-73-00-991-012- 13 (SHEET 1)
R 1EFF : 106-149, 401-499, 1 23-73-00Page 254 1 1 Aug 01/05 1 1 1CES 1
No Smoker Areas Programming - Example
Figure 207/TASK 23-73-00-991-012- 23 (SHEET 2)
R 1EFF : 106-149, 401-499, 1 23-73-00Page 255 1 1 Aug 01/05 1 1 1CES 1
No Smoker Areas Programming - Example
Figure 207/TASK 23-73-00-991-012- 33 (SHEET 3)
R 1EFF : 106-149, 401-499, 1 23-73-00Page 256 1 1 Aug 01/05 1 1 1CES 1
INTENTIONALLY BLANK
R 1 1
23-73-00Page 257
1 1 May 01/05 1 1 1CES 1
No Smoker Areas Programming - Example R Figure 207A/TASK 23-73-00-991-012-A13 (SHEET 1)
R 1EFF : 301-399, 1 23-73-00Page 258 1 1 May 01/05 1 1 1CES 1
No Smoker Areas Programming - Example R Figure 207A/TASK 23-73-00-991-012-A23 (SHEET 2)
R 1EFF : 301-399, 1 23-73-00Page 259 1 1 May 01/05 1 1 1CES 1
No Smoker Areas Programming - Example R Figure 207A/TASK 23-73-00-991-012-A33 (SHEET 3)
R 1EFF : 301-399, 1 23-73-00Page 260 1 1 May 01/05 1 1 1CES 1
(2)
On the numeric keyboard of the ENTER ACCESS CODE window enter the access code 318 and push the ENTER key.
-the ENTER ACCESS CODE window disappears.
(3)
On the CABIN PROGRAMMING page push the related SMOKE PROG. key.
-
the SMOKE PROG. key is illuminated.
-
the related NON SMOKER AREAS window comes on.
NOTE : It is possible to select in addition to the non smoker area
____ programming the cabin zone programming. (Refer to the Cabin Zones programming)
(4)
On the NON SMOKER AREAS window push the related 'Up' or 'Down' key to change the end of non smoker areas in the related cabin zone.
-the selected seatrow numbers are indicated online.
(5)
On the CABIN PROGRAMMING page push the activated SMOKE PROG. key.
-
the NON SMOKER AREAS window disappears.
-
the SMOKE PROG. key is not illuminated anymore.
NOTE : If required, select the next cabin zone or non smoker area for
____
programming before saving the data.
(6)
On the CABIN PROGRAMMING page push the SAVE key.
-a message box with information about the target layout, the date and the new count comes on.
(7)
On the message box push the OK key.
-a message box SAVING IN PROGRESS / FAP BLOCKED comes on.
-after some seconds the message changes to SAVING COMPLETED with layout, count and date information.
(8)
On the message box push the OK key.
-
the message box disappears.
-
the CABIN PROGRAMMING page is shown.
(9)
On the FAP push the CABIN STATUS key.
-the CABIN STATUS page comes on.
Subtask 23-73-00-869-078
C. Programming of Non Smoker Aircraft Configuration
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM Communications 通讯3(126)
