R 1EFF : 151-199, 1 23-73-00Page 405 1 1 May 01/05 1 1 1CES 1 **ON A/C ALL
TASK 23-73-00-440-001
CIDS Director - Reactivation of the CIDS Director
1. Reason for the Job
__________________
Refer to the MMEL TASK: 23-73-01
Communications
CIDS Director
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power TSM 2373 PB101 (for corrective action)
3. Job Set-up
__________ R **ON A/C 001-049, 051-099, 101-105, 201-299,
Subtask 23-73-00-860-147
A. Aircraft Maintenance Configuration
(1)
Make sure that the aircraft electrical cicuits are energized (Ref. TASK 24-41-00-861-002),
(2)
Get access to the avionics compartment.
1EFF : ALL 1 23-73-00Page 406 1 1 May 01/05 1 1 1CES 1R **ON A/C 106-149, 151-199, 301-399, 401-499,
Subtask 23-73-00-860-147-A
A. Aircraft Maintenance Configuration
(1) Make sure that the aircraft electrical cicuits are energized (Ref. TASK 24-41-00-861-002),
**ON A/C ALL
4. Procedure
_________
Subtask 23-73-00-440-050
A. Reactivation of the affected CIDS director 1 (2) 101RH (102RH):
(1) Do the trouble shooting for the defective CIDS director (Ref. TSM 2373 PB101)
5. Close-up
________
Subtask 23-73-00-860-148
A. Put the aircraft back to its initial configuration.
(1) Make sure that the work area is clean and clear of tool(s) and other items.
1EFF : ALL 1 23-73-00Page 407 1 1 Aug 01/05 1 1 1CES 1 CABIN INTERCOMMUNICATION DATA SYSTEM (CIDS) - ADJUSTMENT/TEST
_____________________________________________________________
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299,
TASK 23-73-00-740-003
BITE Test of the Cabin Intercommunication Data System (CIDS) through the PTP
1. Reason for the Job
__________________
Reset and BITE Test of the CIDS.
NOTE : For each LED Cabin Sign: If the test is not deactivated in the CAM,
____
Class 3 fault messages will be recorded.
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
23-33-00-740-002 BITE-Test of the Passenger Entertainment System
(Music) with the Programming and Test Panel (PTP) 23-36-00-740-002 BITE Test of the Passenger Entertainment (Video) 24-41-00-861-002 Energize the Aircraft Electrical Circuits from the
External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 31-32-00-860-003 Procedure to Get Access to the SYSTEM REPORT/TEST/COM
Page
31-60-00-860-001 EIS Start Procedure
31-60-00-860-002 EIS Stop Procedure
1EFF : ALL 1 23-73-00Page 501 1 1 May 01/05 1 1 1CES 1
3. Job Set-up__________
R **ON A/C 001-049, 101-105,
Subtask 23-73-00-860-083
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002)
(2) Do the EIS start procedure (Upper ECAM DU and lower ECAM DU only) (Ref. TASK 31-60-00-860-001)
R (3) Make sure that at least one cabin door is open.
R **ON A/C 051-099, 211-299,
Subtask 23-73-00-860-083-C
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002)
(2) Do the EIS start procedure (Upper ECAM DU and lower ECAM DU only) (Ref. TASK 31-60-00-860-001)
(3) Make sure that the Passenger Entertainment System (Music) is energized (Ref. TASK 23-33-00-740-002).
(4) Make sure that at least one cabin door is open.
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 23-73-00Page 502 1201-299, 1May 01/05 1 1 1CES 1
中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：A320飞机维护手册 AMM Communications 通讯3(135)
