A320飞机维护手册 AMM Communications 通讯3(137)_航空信息_民用航空_通用航空

曝光台注意防骗网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

A. Do this test.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the C/B panel 49VU:
- open the C/B DIR 1 AND 2/ESS 150RH.
2. On the C/B panel 121VU: On the Forward Attendant Panel (FAP) 120RH:
- open the C/B DIR 1 AND 2/NORM 151RH. - the CIDS CAUT light comes on.
On the PTP 110RH:
- the message CIDS DEGRADATION comes on.
In the cockpit on the UPPER ECAM DISPLAY:
- the message COM CIDS 1+2 FAULT comes on.
NOTE : To show all of the message, you____ have to clear all other ECAM
warnings. To clear all other ECAM warnings push the CLR pushbutton on the ECAM Control-Panel (ECP), until all of the COM message appears.
Through the cockpit loudspeaker: - a single chime is heard.
3. On the ECAM Control-Panel (ECP): - push the STS pushbutton. On the LOWER ECAM DISPLAY:- the message INOP SYS CIDS comes on.

R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 23-73-00Page 506 1201-299, 1May 01/05 1 1 1CES 1

5. On the C/B panel 49VU:
-close the C/B DIR 1 AND 2/ESS - the CIDS CAUT light goes off.
150RH.

NOTE : Wait approx. 5 min before you start the next test step.
____
6. On the Programming and Test Panel (PTP) 110RH:
-
push the DSPL ON membrane
switch.

-
push the SYSTEM STATUS related membrane switch.

-
push the CONT related membrane switch until the < MAINTENANCE message comes on.

-
push the MAINTENANCE related membrane switch.

-
push the CONT related membrane switch until the < GND SCAN message comes on.

-
push the GND SCAN related
membrane switch.

-
push the RET related membrane switch until the SYSTEM STATUS page comes on.

-after approx. 5 min the CIDS CAUT light is still off.
In the cockpit on the UPPER and LOWER ECAM DISPLAY:
-all CIDS FAULT messages are off.
On the PTP 110RH:
-
the CIDS menu page comes on.

-
the SYSTEM STATUS page comes on withsystem OK messages.

-
the next system status related pageswith system OK messages come on.

-
the MAINTENANCE page comes on.

-
the GND SCAN page with the NO FAILUREmessage comes on.

-
the SYSTEM STATUS page comes on.

R 1EFF : 001-049, 051-099, 101-105, 201-299, 1 23-73-00Page 507 1 1 May 01/05 1 1 1CES 1

-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
- push the CONT related membrane
switch until the < MAINTENANCE
message comes on.
- push the MAINTENANCE related - the MAINTENANCE page comes on.
membrane switch.
- push the CONT related membrane - the < CLASS 3 FAULTS message comes
switch. on.
- push the < CLASS 3 FAULTS - the CLASS 3 FAULT page with NO
related membrane switch. FAILURE messages comes on.

NOTE : An erroneous CLASS 3 FAULT message will be recorded for each LED
____ (without bulbs) Cabin Sign; if the test of the related signs is not deactivated in the CAM.
-push the DSPL ON membrane - the CIDS menu page comes on.
switch.

**ON A/C 151-199,
Subtask 23-73-00-740-051-A
A. Do this test.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
On the C/B panel 49VU:

- open the C/Bs DIR ESS/1 and DIR ESS/2 150RH and 157RH.

2.
On the C/B panel 121VU:

- open the C/Bs DIR NORM/1 and DIR NORM/2 151RH and 156RH.
On the Forward Attendant Panel (FAP) 120RH:
-the CIDS CAUT light comes on. On the PTP 110RH:
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 23-73-00Page 508 1201-299, 1May 01/05 1 1 1CES 1

-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
3. On the ECAM Control-Panel (ECP):
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM Communications 通讯3(137)