R 1EFF : 106-149, 301-399, 401-499, 1 23-73-00Page 290 1 1 Aug 01/05 1 1 1CES 1 **ON A/C 301-399,
Subtask 23-73-00-865-211
C. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------
PANEL SERVICE IDENT. LOCATION
-------------------------------------------------------------------------------
2001VU CIDS/DEU A NORM/ MID/ LH 197RH C04
2001VU CIDS/DEU A NORM/ MID/ RH 198RH C05
2001VU CIDS/DEU A NORM/ AFT/ LH 173RH C06
2001VU CIDS/DEU A NORM/ AFT/ RH 174RH C07
2001VU CIDS/DEU B NORM/ AFT 194RH C08
R **ON A/C 106-149, 301-399, 401-499,
4. Procedure
_________
Subtask 23-73-00-970-050
A. OBRM - Software Loading
(Ref. Fig. 212/TASK 23-73-00-991-015)
(1) On the FAP in the function-keys bar push the arrow keys until the SW LOAD key is shown.
-push the SW LOAD key.
-
the SW LOAD key is illuminated.
-
the SOFTWARE LOADING page with an activated message box WAIT UNTIL ALL CIDS COMPONENTS HAVE SENT THEIR CONFIGURATION comes on.
-after some time the message box disappears.
NOTE : Make sure that data is shown in the IN SLOT column. If dashes
____ are shown, wait for up to 5 minutes until data replaces the dashes.
(2) On the SOFTWARE LOADING page push the LOAD SW key.
-the ENTER ACCESS CODE window comes on.
-enter the access code 813 and push the ENTER key.
-the ENTER ACCESS CODE window disappears and the message box SOFTWARE LOADING MAY LAST 5 MINUTES and additional information comes on.
NOTE : Ignore the message CHANGE CAM NOW IF NECESSARY.
____
R 1EFF : 106-149, 301-399, 401-499, 1 23-73-00Page 291 1 1 Aug 01/05 1 1 1CES 1
OBRM - Software Loading
Figure 212/TASK 23-73-00-991-015- 13 (SHEET 1)
R 1EFF : 106-149, 301-399, 401-499, 1 23-73-00Page 292 1 1 Aug 01/05 1 1 1CES 1
OBRM - Software Loading
Figure 212/TASK 23-73-00-991-015- 23 (SHEET 2)
R 1EFF : 106-149, 301-399, 401-499, 1 23-73-00Page 293 1 1 Aug 01/05 1 1 1CES 1
OBRM - Software Loading
Figure 212/TASK 23-73-00-991-015- 33 (SHEET 3)
R 1EFF : 106-149, 301-399, 401-499, 1 23-73-00Page 294 1 1 Aug 01/05 1 1 1CES 1
(3)
On the message box push the OK key to start the software loading procedure.
-
a message box WAIT UNTIL SOFTWARE LOADING IS COMPLETED and additional information comes on.
-
a loading bar shows the progress of the loading procedure.
-
after the loading is completed the message box disappears and the system does an auto restart.
-
after the reboot, a message box SOFTWARE LOADING COMPLETED SUCCESSFULLY comes on.
(4)
On the message box push the OK key.
-
the message box disappears.
-
the SOFTWARE LOADING page is shown.
NOTE : Make sure that the data in all fields of the SOFTWARE LOADING
____
page are shown in green color.
(5) On the FAP push the CABIN STATUS key.
-the CABIN STATUS page comes on.
5. Close-up
________
Subtask 23-73-00-869-082
A. Put the aircraft back to its initial configuration.
(1) De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002)
R 1EFF : 106-149, 301-399, 401-499, 1 23-73-00Page 295 1 1 Aug 01/05 1 1 1CES 1
CABIN INTERCOMMUNICATION DATA SYSTEM (CIDS) - DEACTIVATION/REACTIVATION
_______________________________________________________________________ TASK 23-73-00-040-001 CIDS Director - Deactivation of one CIDS Director
1. Reason for the Job
__________________
Refer to the MMEL TASK: 23-73-01
Communications
CIDS Director
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
23-73-34-000-001 Removal of the CIDS Director (101RH,102RH) 24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 31-60-00-860-001 EIS Start Procedure
3. Job Set-up
__________ R **ON A/C 001-049, 051-099, 101-105, 201-299,
Subtask 23-73-00-860-146
A. Aircraft Maintenance Configuration
(1) Make sure that the aircraft electrical cicuits are energized (Ref. TASK 24-41-00-861-002),
(2) Get access to the avionics compartment. R
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM Communications 通讯3(133)
