R **ON A/C 106-149, 151-199, 201-299, 301-399, 401-499,
5. Close-up
________
**ON A/C 151-199, 201-212,
Subtask 22-70-00-860-110
A. Put the aircraft back to its initial configuration.
(1)
On the MCDU, push the line key adjacent to the RETURN indication until the CFDS menu page comes into view.
(2)
Put the disk in the storage box.
R **ON A/C 106-149, 151-199, 211-299, 301-399, 401-499,
Post SB 22-1089 For A/C 151-199,211-212,
Subtask 22-70-00-860-110-A
A. Put the aircraft back to its initial configuration.
(1) On the MCDU, push the MCDU MENU key to get the MCDU MENU page.
(2) Put the disk in the storage box.
R **ON A/C 106-149, 151-199, 201-299, 301-399, 401-499,
Subtask 22-70-00-862-079
B. De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-
002).
R **ON A/C 062-099,
R TASK 22-70-00-610-008-B
R Upload the FM Data
R WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE_______
R YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
R 1. Reason for the Job__________________
R Upload the FM DATA with the Portable Data Loader (PDL) or with a floppy-disk
R data loader (SUNDSTRAND/ALLIED SIGNAL or equivalent).
R 2. Job Set-up Information______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------
R REFERENCE QTY DESIGNATION
R -------------------------------------------------------------------------------
R 964-0400-0XX 1 FLIGHT MANAGEMENT SYSTEM LOAD
R B. Referenced Information
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R 22-70-00-610-009 Crossload the FM Data
R 24-41-00-861-002 Energize the Aircraft Electrical Circuits from the
R External Power
R 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
R from the External Power
R 3. Job Set-up__________
R Subtask 22-70-00-861-072
R A. Aircraft Maintenance Configuration
R (1) Energize the aircraft electrical circuits
R (Ref. TASK 24-41-00-861-002).
R (2) Make sure that the aircraft is in the ground configuration.
1EFF : 062-099, 1 22-70-00Page 339 1 1 May 01/05 1 1 1CES 1
R Subtask 22-70-00-865-119
R B. Make sure that this(these) circuit breaker(s) is(are) closed:
R -------------------------------------------------------------------------------R PANEL DESIGNATION IDENT. LOCATION R -------------------------------------------------------------------------------R 49VU AUTO FLT/FMGC/1 10CA1 B02 R 49VU AUTO FLT/MCDU/1 11CA1 B01 R 121VU AUTO FLT/FMGC/2 10CA2 M17 R 121VU AUTO FLT/MCDU/2 11CA2 N20
R 4. Procedure
_________
R Subtask 22-70-00-970-069
R A. Loading of the Navigation Data Base of the FMS
R NOTE : This procedure is for the FMGC1. For the FMGC2, which is
____ R identical, use the indications between the parentheses.
R NOTE : After the loading of one of the FMGCs, you can use the CROSSLOAD
____ R function (Ref. TASK 22-70-00-610-009) to directly put the data R into the other FMGC.
R -------------------------------------------------------------------------------R ACTION RESULT R -------------------------------------------------------------------------------
R 1. On the center pedestal, on the
R MCDU1(2):
R - turn the BRT potentiometer to
R adjust the brightness.
R 2. Open the circuit breakers 10CA1,
R 10CA2, 11CA1 and 11CA2.
R 3. On the FLIGHT MANAGEMENT SYSTEM
R LOAD (964-0400-0XX):
R - set the ON/OFF switch to OFF.
R - connect the connecting cable to
R the loader connector.
R 4. On the panel 52VU:
R - remove the FMS LOAD blanking
R plate.
MCDU1 and 2 go blank.
1EFF : 062-099, 1 22-70-00Page 340 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM AUTO FLIGHT 自动飞行3(7)
