(4) ARRIVAL procedure
 (a)
 General The only possible revised point for an arrival procedure selection is the destination waypoint. The various elements of an arrival procedure are first strung together, in this order : STAR-Enroute-Transition, STAR (STAR common route + STAR RWY transition), Approach Transition and approach, following the general rules described in para. 2. A. (2). However if one element of the selected arrival procedure has been laterally or vertically modified, when a new arrival is selected, the modifications are lost even if the modified element belongs to the new procedure. Each element may be changed or selected separately creating a TEMPORARY flight plan.
 (b)
 ARRIVAL pages There are two ARRIVAL pages. The first one allows selection of a runway with its associated final; the second one allows selection of a STAR and an enroute transition. In addition, there is the APPROACH VIAS page which allows selection of an APPR VIA.
 1 ARRIVAL page 1 (approach selection)
_
 (Ref. Fig. 036)
 a Access
_ ARRIVAL LS key from the LAT REV page at destination. left or right arrow key from ARRIVAL page 2 (STAR, enroute transition selection).
 b Purpose
_ Displays runways features with associated approaches.
 c Data fields
_
 -Title: in the title line, the destination airport ident is displayed in green large font.
 -1L-1R: this line displays the selected approach, approach via (transition) and STAR if any.
 -2R-TRANS: this field displays the selected STAR enroute transition.
 -3L-5L: the approaches available at the destination airport are displayed for selection. Note that the MLS approaches are only displayed if the MLS is embedded (MLS OPC option is active). The runway length is displayed by the unit (M or FT). Runway heading is displayed below the approach ident.
 ARRIVAL Pages
 Figure 036
 There may be a "T" if the airport is true referenced. 
 - 3R-5R: the ident and frequency of the navaid specified 
 for the approach are displayed under the runway length. 
 - On lines 3 to 5, active approach and features are 
 displayed. 
 NOTE : In the approach list, only the selected approach (as____ 
 displayed in 1L) has no selection arrow. This 
 applies also for STAR, STAR TRANS and APPR VIA 
 lists. 
 - 6L-RETURN or ERASE 
 - 6R-INSERT 
 - The page can be slewed (up and down arrows) page by page 
 (open loop). 
 - When an approach is selected, a TEMPORARY is created and 
 the ARRIVAL page 2 or APPROACH VIA page is automatically 
 displayed. 
 - right and left arrows are displayed to allow access to 
 ARRIVAL 2 page. 
 2_ ARRIVAL page 2 (STAR, enroute TRANS selection) 
 (Ref. Fig. 037) 
 a_ Access 
 Right or left arrow key from ARRIVAL page 1. 
 After selection of an approach on ARRIVAL page 1, if there 
 is at least one STAR compatible with this approach or one 
 or less APPR transition exists to this approach. 
 Return prompt on APPR VIA page. 
 b_  Purpose 
R  Displays the list of STARS which are compatible with the  
R  selected approach, allows access to APPROACH VIAS page. 
 c_ Data fields 
 - Title, 1L-1R, 2R: same as ARRIVAL page 1. 
 - 2L-APPR VIAS: allows access to APPROACH VIAS page. The 
 prompt is displayed any time an approach is selected, if 
 one or several VIAS exist for that approach. Then if a 
 STAR is selected and one or several compatible VIAS exist 
 for the couple APPR/STAR the prompt is also displayed. 
 - 3L-5L: displays the list of STARS which are compatible 
 with the selected approach including the "NO STAR" 
 option. 
 ARRIVAL Pages
 Figure 037
 - 3R-5R: Enroute transitions compatible with the selected 
 STAR are displayed here. The logic of colors for the 
 STARS applies. 
 - When a STAR is selected, the APPROACH VIAS page is 
 automatically displayed if several approach transitions 
 are compatible with the approach and the STAR. 
 Else the list of compatible TRANS appears on the right 
 side of the page and the approach transition if any is 
 shown on the 1st line VIA field. 
 - 6L-RETURN or ERASE: same as ARRIVAL page 1. 
 - 6R-INSERT: same as ARRIVAL page 1. 
 - The page can be slewed (up and down arrows), 3 lines by 3 
 lines in an open loop. The slew rules are identical to 
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM AUTO FLIGHT 自动飞行3(45)