NAVAID Page
Figure 069
If the navaid is a non-collocated VOR/DME, VORTAC, ILS/DME or MLS/DME, ILS/TAC, the word NON-COLLOCATED will be displayed.
-3L-LAT/LONG of navaid: if a non-collocated VOR/DME is displayed, the LAT/LONG is the VOR latitude and longitude. The LAT/LONG displayed for an ILS or and ILS/DME is the LAT/LONG of the localizer. The LAT/LONG displayed for a MLS or a MLS/DME is the LAT/LONG of the Azimuth antenna.
-4L-FREQ or CHAN: frequency of selected navaid except for MLS and MLS/DME (6 fields NNN.NN in MHz). If the class of the navaid is MLS or MLS/DME, this field is replaced by the channel number (NNN) with the label CHAN displayed in label line.
-5L-ELV: elevation of selected navaid in feet to the nearest 10 feet. If the navaid is a non-collocated VOR/DME or VORTAC, the elevation is the DME/TACAN elevation. If a VOR only or a NDB is displayed, the elevation field is blank. If the navaid is a non-collocated ILS/DME or MLS/DME or ILS/TAC, the elevation is the ILS/MLS elevation.
-6L-FIG OF MERIT: a figure assigned to each navaid indicating the maximum distance at which it can be tuned. The distance is displayed in small font in parentheses following the large font figure of merit as follows: 0 (0-40 NM) 1 (1-70 NM) 2 (2-130 NM) 3 (3-250 NM)
A figure of merit does not exist for LOC, ILS, MLS or NDB; so this field is blank when these classes of navaid are displayed.
-1R-STATION DEC or RWY IDENT
*
the station declination of the navaid is only displayed if the navaid is a VOR, VORTAC or VOR/DME. The Station Declination is displayed as a two numerical digits (with leading zeroes) followed by a "E" (East) or a "W" (West) indication. In case of True referenced station, "0T" is displayed.
*
the runway ident is only displayed if the navaid is a LOC, ILS, ILS/DME, ILS/TAC, MLS or MLS/DME. * otherwise the field is blank.
-2R-CATEGORY: if the navaid is an ILS, ILS/DME or ILS/TAC, MLS or MLS/DME, the ILS/MLS approach category is displayed into this field.
-3R-COURSE: if the navaid is a LOC or ILS or ILS/DME or ILS/TAC, the course of the localizer is displayed here. If the navaid is MLS or MLS/DME, the Azimuth bearing corresponding to the final approach inbound course is displayed here. In both cases the course is displayed as a 3 digit format followed by a possible "T" character for true north reference.
-4R-SLOPE: if the navaid is MLS, the SLOPE is displayed here.
-If the entered identifier is not found in the data base or pilot-stored navaid list, then the NEW NAVAID page is displayed with the IDENT field filled.
-6R-RETURN: allows return to the selected navaids page. This prompt is only displayed if the NAVAID page has been accessed from the selected navaids page.
3 If the pilot wants to get information about a navaid he has
_ created and stored, he may have access to the NAVAID or the STORED NAVAID pages, which are accessed from the DATA INDEX B page.
a Data fields:
_
(Ref. Fig. 070)
-Title: the right part of the title line indicates how many navaids have been stored by the pilot and which one is displayed. The first and last of 20 are displayed.
-1L-6L: same as NAVAID page with green data, only non-collocated navaids are not displayed.
-1R-4R: same as NAVAID page with green data.
-5R-NEW NAVAID: allows access to the NEW NAVAID page to define and store a navaid.
-6R-DELETE ALL and CONFIRM DELETE ALL: when confirmed this prompt deletes all stored navaids from the stored navaid list. The page changes to the NEW NAVAID page. If any of the stored navaids are used in any F-PLN or on any MCDU page then the used navaids are not deleted and message F-PLN ELEMENT RETAINED is displayed. The display stays on the STORED NAVAID page with 1/X displayed. If the pilot does not confirm the DELETE ALL by not selecting the CONFIRM DELETE ALL prompt, this prompt reverts to the DELETE ALL prompt as soon as any mode key or line select key (except 6R) is pressed on the MCDU on which the DELETE ALL prompt was selected.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM AUTO FLIGHT 自动飞行3(61)
