曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Put the clearance delivery wavs in the \winwood\nnn\cd directory. The file names must be in the format of CDn-CDnn, where n is a number between 100 and 399 (\winwood\248\cd directory)
Put the ground wavs in the \winwood\nnn\gnd directory. The file names must be in the format of GNDn-GNDnn, where n is a number between 100 and 399 ((\winwood\248\cd directory)
Put the tower wavs in the \winwood\nnn\twr directory. The file names must be in the format of TWRn-TWRnn, where n is a number between 100 and 399 ((\winwood\248\cd directory)
Put the departure wavs in the \winwood\nnn\dep directory. The file names must be in the format of DEPn-DEPnn, where n is a number between 100 and 399 ((\winwood\248\cd directory)
Put the approach wavs in the \winwood\nnn\app directory. The file names must be in the format of APPn-APPnn, where n is a number between 100 and 399 ((\winwood\248\cd directory)
Center wavs are divided into low, high, super stratums (layers).
Put the low center wavs in the \winwood\nnn\atc1 directory. The file names must be in the format of ATC1n-ATC1nn, where n is a number between 100 and 399 ((\winwood\248\cd directory)
Radar Contact Advanced Users
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 133
Put the high center wavs in the \winwood\nnn\atc2 directory. The file names must be in the format of ATC2n-ATC2nn, where n is a number between 100 and 399 ((\winwood\248\cd directory)
Put the super center wavs in the \winwood\nnn\atc3 directory. The file names must be in the format of ATC3n-ATC3nn, where n is a number between 100 and 399 ((\winwood\248\cd directory)
If you want to add a country specific chatter:
Create a directory in \winwood of the country; let's call it Elbonia for an example (\winwood\Elbonia)
Find all the centers that are in Elbonia (you would never create a country directory, if there was only 1 center in it)
Place a file called $Elbonia.txt in the root directory of each center directory, of Elbonia. (Let‟s say it was centers 123, 144, and 155 examples only). This file indicates to RC, that the chatter files do not exist in the center directory, but in the country directory (\winwood\123 - no files, \winwood\Elbonia - chatter files)
Follow the rules for adding center specific chatter (above), and add the chatter directories and files to the \Elbonia directory
When the wav files are placed in the appropriate folder they must be added to the existing wavs numbering scheme or have a new one started in the case of a previous blank folder. An excellent program to accomplish this is CKRename Version 1.06. This simple program has three main frames, DIRECTORY, EXISTING FILENAME, AND FILENAME PREVIEW. First, select which folder(s) the new wav files have been added, example USA-APP. All of the existing wav files and the new ones will be listed in the second frame (EXISTING FILENAME). Below the 3 frames are several instruction boxes (Change Filename, Auto Number, Change Extension, Change Case, and File Mask). Let‟s proceed with the 4 steps to make the changes. First, under the Change Filename we “tick” the box Replace and then add the name (in our example) [app] in the box (DO NOT TYPE THE BRACKETS). The file names will automatically change in the third frame FILENAME PREVIEW. Second, go to the Auto Number Section, then “tick” the after button and place a 1 in both the Start At box and the Increment Box and 0 in the Zero Fill Box. Third, go the Change Extension and Change Sections, then “tick” the None button in both sections. Leave the File Mask box with a *.* in the window. Fourth go up to the File menu and select Rename, this will change all the names in the FINENAME PREVIEW, to “app1-100+ in consecutive order. You would follow the same procedure for each category, app, atc1, atc2, atc3, cd, dep gnd, and twr that you have new wav files for.
Radar Contact Advanced Users
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 134
Running Radar Contact on a Networked Machine Using WideFS.
By John Burgess In my experience, RC works even better when run on a second machine using WideFS. The menus respond more quickly and changes (such as turning RC chatter on and off or requesting change of destination) can be made „on the fly‟ without pausing or losing focus from FS. The following notes assume that you already have a network set up and WideFS installed and working. They hopefully cover all the issues you need to know about to get RC up and running on the second machine.
You need all the RC files, including any chatter you wish to use, installed on the second machine. You can achieve this either by copying the files across from the main machine or by performing a fresh install on the second machine. In either case, you will need to apply for a new key to run RC on the second machine. If you only intend using RC on the second machine, you do not need it installed on your main machine.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
Radar Contact(47)
