曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Radar Contact Quick Start Guide
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 30
Under the Other section, please make sure Chkpt Ding, Interact with AI, Play Pilot Wavs, Pilot Auto-Reply, and Tune on Contact all have check marks next to them. Click the OK button. Once you have selected the options desired, which are discussed in more detail in the general section of the manual, click OK and exit this screen. The main screen now has populated under the Options section with the following: Another feature of RC is the availability of “Tool Tips”. For example, put your mouse cursor on the “Alt Restriction” procedure and the following window opens. The next option available is the “Keyboard”. When you click on this icon, you are presented with the following screen.
Radar Contact Quick Start Guide
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 31
You can customize the key combinations for RC as much as you want. Use whatever keys you want. Just be careful they do not interfere with the settings of FS itself. For instance, it would not be wise if you set „g‟ to be the key for repeating last instruction, since you would lower the gear at the same time. One thing to note: new key combinations do not take effect until you restart FS. Click Save and your settings will be applied in the next session of FS. Click Cancel to exit this window without saving. Click OK and you will be returned to the main screen. The final screen available in RCv4 under Options is the “Voices” section. The number of pilots, controllers, and chatter pilots has been significantly increased in RCv4. In addition, flexibility has been added to allow the user to select which voices they want.
Radar Contact Quick Start Guide
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 32
One item to note is that if when a voice is chosen as a pilot or co-pilot, you may not want the same voice uses as a controller. Make your selections and click the Save option. Finally, you will notice four icons under the Utilities section of the main menu screen. “Rebuild Scenery DB” is important to run initially to allow RCv4 to align its database with the runway/taxiways you have built into Flight Simulator. While the default FS database has been included, any add-on scenery packages you have added will skew available runways and/or positioning. It is important to run this utility whenever you modify your scenery as well to re-synch between where you think you are and where RCv4 thinks you are. NOTE: If you are running RC on a WideFS configured machine, please read: The file Makerwys.exe should be located in the main Flight Simulator folder. Run it and it creates a file r4.csv in the main Flight Simulator folder that contains the runway information which RC needs for all the active sceneries in your scenery.cfg file.
Now run RC on the WideFS machine.
Radar Contact Quick Start Guide
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 33
On the RC main screen click the „Rebuild Scenery DB‟ button and answer „yes‟ when asked „Is this a WideFS configuration‟. You will be reminded to run makerwys.exe on the FS machine. If you have done so click OK. At the next screen, enter the network path to your main Flight Simulator folder. RC will now copy the r4.csv file from your Flight Simulator folder into the RCv4\data folder and will then rebuild the airport database (a4.csv). You will receive several messages telling you what is happening. Keep clicking OK until the process is completed. The second icon “Check for Updates” allows the program to query the Radar Contact server for software updates to the program. This is a good utility to run after you first load RCv4 and periodically thereafter. The “Debug” icon is useful when you run into a repeatable problem. JDTLLC tech support will request that you run with Debug highlighted and send them the file for analysis. You do not want to run in Debug mode unless instructed to as the file sizes can get quite large. Finally, the “About” icon displays details about your version of Radar Contact, and optionally about your computer. We can now close Radar Contact and launch Flight Simulator for the last bit of configuration.
FSUIPC Setup
In FS9, click on the FS9 modules menu item, then click FSUIPC. In FSX, click on the FSX add-ons menu item, and then click FSUIPC. You will see something like this
Radar Contact Quick Start Guide
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 34
Make sure the “FSUIPC multiline display window” checkbox is checked, and the “Hide all single line messages” checkbox is checked. Click OK
Step 5 - Radar Contact and Other Add-On Software Incompatibilities
Radar Contact will not function properly if either FSHotSeat or FSHotSFX is installed. When either FSHotSeat or FSHotSFX is loaded for the first time, it permanently changes the FSUIPC TCASid parameter (in the FSUIPC.INI file) from Flight to Type+. This means that AI aircraft are now always identified by type and model rather than by airline and flight number, regardless of the application currently using FSUIPC. This adversely affects RC AI chatter. Users of Active Sky V need to go into the Startup and General group box of the Options Form and disable the item titled “Voice ATIS/Flightwatch” as well as check the box “Disable Text Messages”. Otherwise, you will receive ASV ATIS reports on 122.0 over the top of RC‟s instructions.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
Radar Contact(16)
