曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
You may now begin adjusting options and controller information as desired.
Flight plan information is displayed here
Radar Contact Flight Planning
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 80
FSBuild
By Bob Johnson There are many flight planning tools available for MSFS. FS Build is a flight-planning program that provides a powerful set of functions to perform detailed flight planning. For ease of understanding, we will use the same flight as one of the other flight plan examples: 05C (GRIFFITH_MERRILLVILLE) to KLAF (Lafayette/Purdue University). From the route panel in FS Build, Place 05C in the Departure field and KLAF in the Destination field, along with the runways that are expected to be used for both.
Radar Contact Flight Planning
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 81
Then toggle the PM (plan mode) to get the departure and destination points displayed. The route for this example that is displayed at the air traffic controller strip would be:
Two dots signify direct routing between two points and a single dot signifies routing via published airway or fix. When the above plan is entered into FS Build‟s flight plan area;
05C.CGT.V7.BVT.KLAF
Radar Contact Flight Planning
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 82
And the build function is invoked the route with its waypoints, distance, headings, plan altitudes will be displayed like this: Editing of the flight plan can be done easily from this view. The route map will also be displayed in the lower panel of FS Build for you to review airways, NAVAIDs, and other navigations points.
Radar Contact Flight Planning
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 83
After the build process has been completed, FS Build will produce a detailed flight plan that gives detailed information for amount of fuel to be used by any aircraft (data here is for 737-800). FSB will export the flight plan to many third party add-ons. This includes the LDS 767, PIC 767, ACS-GPS, Flight One ATR 72, FS 2004/FSX flight planner, FS ACARS, FS Commander, FS MCP, FS Navigator, GPS 98, IVAP, Lago MD80, PMDG 737NG, PMDG 747/400, Navdata/Real CRT, PS 1, PSS A320/A330/A340, PSS 747/777, Squawk Box and SSW A310. Complete details on the use and functions of FS Build; go to the FS Build website: http://www.fsbuild.com/.
Radar Contact Flight Planning
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 84
Once you have saved your route in FS200x format with a .pln file extension, your flight plan is ready for immediate use by Radar Contact. Double-click the Radar Contact shortcut on the desktop. You will see the main screen as shown below. To load your FS200x flight plan, click FS200x [*.pln].
Click FS200x (.pln) button
Radar Contact Flight Planning
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 85
Once you click FS200x, the Open PLN File window will appear showing all of the available .PLN files. Your 05C-KLAF flight plan file will be listed. If you saved your plan file to another directory, you will have to browse to locate your file.
Select your .pln file and click Open.
Click Open
Select the .pln file
Radar Contact Flight Planning
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 86
After you click Open, Radar Contact will load your flight plan information. Your city pairs, altitude, and other pertinent flight plan information will be displayed in the main RC window. You may now begin adjusting options and controller information as desired.
Flight plan information is displayed here
Radar Contact Flight Planning
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 87
Planning – KLAS - KLAX
Our next flight plan from Las Vegas McCarran International to Los Angeles International will utilize an air carrier type aircraft, a published departure procedure (DP), a published arrival procedure (STAR), and an alternate airport for destination. When flight planning for an air carrier flight that you know will be using published procedures on both the departure and arrival, it tends to be easier if you plan which DP and STAR you would like to use and then plan the enroute portion to link the two ends last. The route we will plan today will be as follows: KLAS.IDALE1.HEC.J64.CIVET.CIVET4.KLAX
Departure Procedure (DP)
We will start off with a look at the Instrument Departure Procedure, or DP, first. The Aeronautical Information Manual defines the DP as follows: A preplanned instrument flight rule (IFR) air traffic control departure procedure printed for pilot use in graphic and/or textual form. DP's provide transition from the terminal to the appropriate enroute structure. The key phrase is “provides transition from the terminal to the appropriate enroute structure”. Using published departure procedures when available will not only simplify the process of obtaining your clearance, it will provide a standardized routing structure to smoothly transition you to the enroute phase of your flight.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
Radar Contact(34)
