• 热门标签

当前位置: 主页 > 航空资料 > 空管资料 >

时间:2010-10-02 09:05来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

o ScotFlight 2.1
o Simflyers KJFK, KORD, KEWR, KIAD, KLAX, KLAS, KPHX, KMCO, EDDF, CYYZ
o OSS EGKA
o UK2000 EGLC
o FS Autostart
o FS Realtime
o AISmooth 1.11
o Autosave 1.5
Radar Contact Introduction
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 19
o GPSOut 2.58
o Trafficlook 1.54
o ShowText 1.102
o WideFS 6.5
o FS9 Configurator
o FlyTampa sceneries (all)
o Samsoft Shanghai 2004
o PFC Equipment
o All Project Magenta software
o FS Co-pilot
o FlightKeeper
o MegaSceneries (all)
o MegaCities (all)
o Horizon‟s VFR Chicago
o Active Camera Pro
o FS Passengers
o Lago FSE
o FS-Interrogate2
o Over 20 freeware sceneries

Radar Contact Quick Start Guide
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 21
Quick Start Guide
This section is divided into six steps:
1. Install Radar Contact.
2. Develop your flight plan using your chosen planner.
3. Load the flight plan into Radar Contact.
4. Set your Radar Contact Options.
5. Quick discussion of other software add-on incompatibilities with RC.
6. Fly the flight plan in FS2004 or FSX.
Step 1 - Install Radar Contact
Installation is straightforward. Once you receive your CD, insert it into your CD Drive. If the following screen does not automatically show, use your Explorer to find the rcv43.exe file, which is located in the root-directory of the CD. Double click on the RCv4 icon to start the installation process. The following screen will appear. Check that you have other applications closed, then click “next”. The next screen will provide you with a copy of the RCv4 license agreement. Scroll through it (it is not long), then click “I accept the agreement” option.
Radar Contact Quick Start Guide
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 22
Click Next. This will open the following “Select Destination Location” screen, which identifies where Radar Contact v4.3 will be installed. It also identifies the amount of space that needs to be available on your hard drive to accommodate the program. Once you are satisfied with the location, click the “Next”. The following screen will appear. Then pick the kind of installation that you want: a drop-down box lets you choose the version of Flight Simulator (RCv4 works with FS2004 and/or FSX).
Radar Contact Quick Start Guide
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 23
The minimum installation option includes the program files, pilots and controller voices, and two required interfaces between RC and FS: FSUIPC. After installation, check the website (http://www.schiratti.com/dowson.html) for updates to this utility, written by Peter Dowson. ”Full” installation installs the files included in the minimum install button, plus, thousands of chatter files which were recorded from real communications on the airways between pilots and controllers. You do not have to install them; if you do not, you can use RC‟s own generated chatter. Clicking Next will be a “Select Start Menu Folder” screen. Click on the “Next” option, which will lead to the following “Ready to Install” screen, which summarizes the options selected in the earlier screens. If all is correct, click the “Install” option. If you want to change parameters, click the “Back” option.
Radar Contact Quick Start Guide
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 24
When you select the “Install” option, the following screen will appear. It provides you with a status of the installation progress. While it installs, it might be a good time to go get a drink since installation takes a few minutes. When installation is complete, Radar Contact closes. Remove the CD from your computer drive, go to your start menu, and open Radar Contact. The following screen will appear.
Radar Contact Quick Start Guide
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 25
You will see a number in a registration box, which is your Product ID number. Fill in your name and click the Email button. Your name and number will be sent to register@jdtllc.com, and you will receive an activation key within 24 hours. If you ever need to reinstall Windows, or upgrade your hardware, you will need a new key. All registered users will be issued replacement keys promptly, free of charge. New Product IDs for replacement keys should be sent to register@jdtllc.com. Be sure to include your full name and email address as per the original registration. IMPORTANT NOTE – Copy/paste your Key to the Registration field to avoid mistakes and delays in registration. Do not type this number out. It must be exact. Also if there is a minus sign in front of the Product ID, include that in with your key request. Now that you have received your activation key and pasted it into the identified location. The following Radar Contact Version 4 screen will appear.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:Radar Contact(14)