1 — Rod
2 — Bolt
3 — Washer
4 — Nut
5 — Cotter pin
6 — Servo—actuator
7 — Connector
8 — Crankpin
9 — Bolt
10 — Washer
11 — Nut
12 — Adjustment nut
ACAC
Validity : CENTURY 31 Roll servo—actuator — Removal / Installation
Figure 201
22-11 Page 202
00 (AM) DEC 99
D. Removal of the pitch servo—actuator (Figure 202)
1) Open A / P circuit breaker.
2) Remove the access door of the baggage compartment bottom 242.
3) Disconnect the connector (12).
4) Uncouple the rod (1) on crankpin (9). Retain the nut (10), washers (7) and (8) and the bolt (6). Discard
the cotter pin (11).
5) Hold the servo—actuator (2) and retain bolts (3), washers (4). Discard nuts (5).
6) Remove the servo—actuator on the work bench.
E. Installation of the pitch servo—actuator (Figure 202)
1) Position the servo—actuator (2).
2) Secure the servo—actuator (2) with bolts (3), washers (4) and new nuts (5).
3) Secure the rod (1) to the crankpin (9) with the bolt (6), the washers (7) and (8) and the nut (10). Lock with
a new cotter pin (11).
4) Connect the connector (12).
5) Install the access door of the baggage compartment bottom 242.
6) Close A / P circuit breaker.
ACAC
Validity : CENTURY 31 22-11-00 (AM) Page 203
DEC 99
1 — Rod
2 — Servo—actuator
3 — Bolt
4 — Washer
5 — Nut
6 — Bolt
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:TB20 MAINTENANCE MANUAL 22 AUTO FLIGHT TB20飞机维护手册 22 自动飞行(12)