(b)
fire and smoke training;
(c)
survival training on ground and in water, appropriate to the type and area of operation;
(d)
aero-medical aspects and first-aid; and
(e)
communication and relevant CRM elements of ORO.FC.115 and ORO.FC.215.
ORO.TC.120 Operator conversion training
Each technical crew member shall complete:
(a)
operator conversion training, including relevant CRM elements,
(1)
before being first assigned by the operator as a technical crew member; or
(2)
when changing to a different aircraft type or class, if any of the equipment or procedures mentioned in (b) are different.
(b)
Operator conversion training shall include:
(1)
the location and use of all safety and survival equipment carried on the aircraft;
(2)
all normal and emergency procedures; and
(3)
on-board equipment used to carry-out duties in the aircraft or on the ground for the purpose of assisting the pilot during HEMS, HHO or NVIS operations.
ORO.TC.125 Differences training
(a)
Each technical crew member shall complete differences training when changing equipment or procedures on types or variants currently operated.
(b)
The operator shall specify in the operations manual when such differences training is required.
ORO.TC.130 Familiarisation flights
Following completion of the operator conversion training, each technical crew member shall undertake familiarisation flights prior to operating as a required technical crew member in HEMS, HHO or NVIS operations.
ORO.TC.135 Recurrent training
(a)
Within every 12 month period, each technical crew member shall undergo recurrent training relevant to the type or class of aircraft and equipment that the technical crew member operates. Elements of CRM shall be integrated into all appropriate phases of the recurrent training.
(b)
Recurrent training shall include theoretical and practical instruction and practice.
ORO.TC.140 Refresher training
(a)
Each technical crew member who has not undertaken duties in the previous 6 months shall complete the refresher training specified in the operations manual.
(b)
The technical crew member who has not performed flying duties on one particular aircraft type or class during the preceding 6 months shall, before being assigned on that type or class, complete either:
(1)
refresher training on the type or class; or
(2)
two familiarisation sectors on the aircraft type or class.
Appendix I to Annex III
DECLARATION in accordance with Commission Regulation (EC) No XXX/XXX on Air operations
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：Annexes to the draft Commission Regulation on ‘Air Operations - OPS’(67)
