S 612-015
(8)
Use the slide deflation tool to fully deflate the escape slide.
S 862-018
(9)
Refer to the instructions from the slide manufacturer to examine, repair, and repack the escape slide.
S 212-021
(10)
Examine these items for damage:
(a)
The trigger pin mechanism.
(b)
The door hinge arms.
(c)
The door guide arm.
(d)
The emergency power actuator and chain.
NOTE: You can get access to the emergency power chain through
____ the external access panel for the body torque tube. You can get access to the emergency power actuator through the internal sidewall panel.
S 712-022
(11) Do a test for the correct operation of these items (Ref 52-11-00):
(a)
The interior handle.
(b)
The exterior handle.
S 412-023
(12)
Close the passenger door.
S 862-024
(13)
Move the mode selector lever to the DETACH position.
S 012-027
(14)
Remove the cover for the escape slide (Ref 25-66-01).
(15)
Remove the restraint from the cover.
(16)
Install the escape slide (Ref 25-66-01).
(17)
Install the cover (Ref 25-66-01).
(18)
Remove the emergency power reservoir (Ref 52-11-30).
(19)
Do the servicing for the emergency power reservoir (Ref 12-15-10).
S 032-031
S 422-033
S 412-037
S 032-039
S 612-040
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-66-00
ALL ú ú 01 Page 203 ú Dec 20/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
S 432-041
(20)
Install the emergency power reservoir (Ref 52-11-30).
S 212-042
(21)
Do the inspection/check for the passenger door (Ref 52-11-01).
TASK 25-66-00-602-043
3. Put Back the Escape System - No. 3 Emergency Exit Door
______________________________________________________
A. Equipment
(1)
Clamp - Slide Deflation - Stanly Part
No. 43-162P
(2)
Rope (or cord) - 1/4 or 3/8 inch diameter by 50
feet long - commercially available
B. References
(1)
52-21-01/501, No. 3 Emergency Exit Door
(2)
52-21-01/601, No. 3 Emergency Exit Door
(3)
52-21-03/401, No. 3 Emergency Exit Door Lining
C. Access
(1) Location Zones
835 No. 3 Emergency Exit Door (Left)
845 No. 3 Emergency Exit Door (Right)
D. Procedure
S 612-044
(1)
Use the slide deflation tool to deflate the escape slide until the slide is soft, but keeps its shape.
S 492-045
(2)
Attach the ends of a rope to the two ends of the girt bar as close to the girt material as it is possible.
S 032-046
(3)
Disconnect the girt bar from the floor fittings.
NOTE: To make it easier to disconnect the girt bar from the floor
____
loosen the girt.
S 162-047
CAUTION: MAKE SURE THE AREA ON THE GROUND BELOW THE ESCAPE SLIDE IS
_______ CLEAN. SHARP OBJECTS ON THE GROUND CAN CAUSE DAMAGE TO THE SLIDE WHEN IT IS LOWERED.
(4) Make sure the area on the ground below the inflated escape slide is clean.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-66-00
ALL ú ú 10 Page 204 ú Jun 20/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
S 032-048
CAUTION:_______BE CAREFUL WHEN YOU LOWER THE INFLATED ESCAPE SLIDE. DAMAGE TO THE SLIDE OR THE INFLATION COMPONENTS CAN OCCUR IF THEY ARE NOT MOVED CORRECTLY.
(5)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 EQUIPMENT/FURNISHINGS 2(72)
