A
Cargo Compartment Sidewall Lining Installation Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-50-02
ALL ú ú 02 Page 402 ú Mar 20/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
(2) Access Panels
821 No. 1 Cargo Door
822 No. 2 Cargo Door
D. Procedure
S 824-007
(1)
Put the sidewall lining in position against the supports. Use the hook/loop tape to help you get it aligned correctly.
S 164-008
(2)
Clean the area on and around the fasteners, seams, and gaps with a cheesecloth which is moist with Isopropyl Alcohol, or Naphtha.
S 164-009
(3)
Rub these areas dry with a clean cheesecloth before the solvent becomes dry.
S 434-011
(4)
Install the fasteners.
S 434-012
(5)
Put new tape on all of the fasteners, seams, and gaps in the sidewall lining.
S 914-014
(6)
Use the heat gun and the roller on the tape.
S 914-016
(7)
Push on the sidewall lining with your hand in the areas of the hook/loop tape to make sure the hook/loop tape is fully attached.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-50-02
ALL ú ú 02 Page 403 ú May 20/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
BULKHEAD LINING - REMOVAL/INSTALLATION
______________________________________
1. General_______
A. This procedure contains two tasks. The first task is the removal of the bulkhead linings in the forward and aft cargo compartments. The second task is the installation of the bulkhead linings in the forward and aft cargo compartments.
B. The blowout panels and heat outlet grills on the bulkhead linings do not have to be removed.
TASK 25-50-03-004-001
2. Remove the Bulkhead Lining__________________________
A. Access
(1)
Location Zones
121 Forward Cargo Compartment (Left)
122 Forward Cargo Compartment (Right)
153 Aft Cargo Compartment (Left)
154 Aft Cargo Compartment (Right)
(2)
Access Panels
821 No. 1 Cargo Door
822 No. 2 Cargo Door
B. Procedure
S 024-003
(1) Remove and discard the tape.
NOTE:____Do not use the tape again. Used tape will not bond satisfactorily.
S 034-004
(2)
Remove the screws from the edges of the lining.
S 034-005
(3)
Remove the capstrips, if they are installed.
S 024-006
(4)
Remove the bulkhead linings.
TASK 25-50-03-404-002
3. Install the Bulkhead Lining___________________________
A. Equipment
(1)
Heat gun - commercially available
(2)
Roller - commercially available
B. Consumable Materials
(1) G00033 Cheesecloth - BMS 15-5
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-50-03
ALL ú ú 01 Page 401 ú May 28/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
FORWARD BULKHEAD LINING
SEE A
AFT BULKHEAD
LINING
SEE B
BLOWOUT PANEL
FORWARD BULKHEAD LINING
A
BLOWOUT PANEL ELECTRICAL AND ELECTRONIC ACCESS PANEL
HEAT OUTLET DUCT
HEATING SYSTEM ACCESS PANEL
AFT BULKHEAD LINING (EXAMPLE)
B
Forward Cargo Compartment Bulkhead Lining Installation
Figure 401 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：757 AMM 飞机维护手册 EQUIPMENT/FURNISHINGS 2(22)
