25-50-03
ALL ú ú 01 Page 402 ú May 28/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
FASTENER (EXAMPLE)
FASTENER
(EXAMPLE)
BLOWOUT
PANEL BLOWOUT PANELS
AIR RECIRCULATION FILTERS ACCESS PANEL
HEAT OUTLET HEAT
OUTLET DUCT
DUCT
HEATING SYSTEM
ACCESS PANEL
HEATING SYSTEM ACCESS PANEL
AFT BULKHEAD LINING AFT BULKHEAD LINING
(EXAMPLE)
(EXAMPLE) B
B
FASTENER
BLOWOUT
(EXAMPLE)
PANEL
AIR RECIRCULATION HEATFILTERS ACCESS OUTLETPANEL DUCT
HEATING SYSTEM ACCESS PANEL FASTENER (EXAMPLE)
BLOWOUT PANEL
AIR RECIRCULATION FILTERS ACCESS PANEL
AFT BULKHEAD LINING
HEAT
(EXAMPLE)
OUTLET DUCT
B
HEATING SYSTEM ACCESS PANEL
AFT BULKHEAD LINING (EXAMPLE)
B
Forward Cargo Compartment Bulkhead Lining Installation
Figure 401 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-50-03
ALL ú ú 01 Page 403 ú May 28/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
AFT BULKHEAD LINING
SEE B
FORWARD BULKHEAD
LINING
SEE A
BLOWOUT
PANEL
FORWARD BULKHEAD LINING
A
AFT BULKHEAD LINING
(EXAMPLE)
BLOWOUT PANEL ZIPPER (2 LOCATIONS)
B
AFT BULKHEAD LINING (EXAMPLE)
ZIPPER B
BLOWOUT PANEL (2 LOCATIONS)
AFT BULKHEAD LINING (EXAMPLE)
B
Aft Cargo Compartment Bulkhead Lining Installation
Figure 402
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-50-03
ALL ú ú 01 Page 404 ú May 28/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
(2) Tape
NOTE: Use one of these tapes.
____
(a)
G00348 Permacel - Glass cloth, flame resistant P621
(b)
G02101 Permacel - Glass cloth, flame resistant P212HD
(c)
G01338 3M 367-FR
(3)
A00247 Sealant - Chromate Type BMS 5-95
Class B-1/2
(4)
Solvent
NOTE: Use one of these solvents.
____
(a)
B00090 1-1-1 trichloroethane - MIL-T-81533
(b)
B00093 Tetrachloroethylene -0-T-236
(c)
B00111 Freon TF
C. Access
(1)
Location Zones
121 Forward Cargo Compartment (Left)
122 Forward Cargo Compartment (Right)
153 Aft Cargo Compartment (Left)
154 Aft Cargo Compartment (Right)
(2)
Access Panels
821 No. 1 Cargo Door
822 No. 2 Cargo Door
D. Procedure
S 214-007
(1)
Examine the seal between the linings and the support structure (Fig. 401). Install a new seal if you find damage.
S 414-008
(2)
If you will install a new lining, install the blowout panels and the heat outlet grill.
NOTE: Some linings do not have blowout panels or heat outlet
____
grills.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-50-03
ALL ú ú 04 Page 405 ú Dec 20/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
(3) S 564-002AFT BULKHEAD LINING WITH DIAGONAL ZIPPER AND BLOWOUT PANELS; Put the lining on the supports to align the mount holes.
(4) S 164-010For the forward bulkhead in the forward compartment, do the steps that follow: (a) Clean the area on and around the fasteners, seams, and clearances with a cheesecloth that is moist with Naphtha, BMS 11-7, Citra Safe, FCC-55, MEK:sec-Butyl Alcohol (42:58), MEK, or MPK . (b) Dry the area with a clean cheesecloth before the solvent drys. (c) Make sure that all of the dirt, oil, paint and unwanted materials are fully removed. Clean the area one more time if it is necessary.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 EQUIPMENT/FURNISHINGS 2(23)
