曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
• 280V for 1 minute.
• 270V for 1 minute.
The ← key (backspace) will terminate the test at any time.
LTAGE
California Instruments 141
User Manual Compact i/iX Series
11. Option –ABD: Airbus ABD0100.1.8 Test
Use of this option requires the following:
.
• ndows software or higher. Provided on CI P/N CIC496 CD ROM or available for
• in order to meet all ABD directive test requirements.
Info a re
.
• Compact i/iX Series AC power source.
• -ABD option. Options installed are listed on unit’s serial tag.
• Windows XP/2000 PC with USB, LAN or National Instruments GPIB controller interface
IXCGui Wi
download from California Instruments’ website.
Additional equipment will be required
rm tion on how to operate the GUI for ABD0100.1.8 testing may be found in the Avionics Softwa
Manual, CI P/N 4994-971. This manual is distributed on the same CD ROM as this user manual
California Instruments 142
User Manual Compact i/iX Series
12. Option –AMD: Airbus AMD24 Test
Use of this option requires the following:
• Compact i/iX Series AC power source.
• -AMD option. Options installed are listed on unit’s serial tag.
• Windows XP/2000 PC with USB, RS232, LAN or National Instruments GPIB controller
interface.
• IXCGui Windows software. Provided on CI P/N CIC496 CD ROM or available for download
Avionics Software Manual, CI P/N 4994-971. This manual is distributed on the same CD ROM as this
user manual.
from California Instruments’ website.
• Additional equipment will be required in order to meet all AMD directive test requirements.
Information on how to operate the GUI for A400M directive AMD24 testing may be found in the
California Instruments 143
User Manual Compact i/iX Series
13. Option –B787: Boeing B787-0147 Test
U
iXCGui Windows software or higher. Provided on CI P/N CIC496 CD ROM or available for
download from California Instruments’ website.
how to operate the GUI for B787-0147 testing may be found in the Avionics Software
Manual, CI P/N 4994-971. This manual is distributed on the same CD ROM as this user manual.
se of this option requires the following:
• Compact i/iX Series AC power source.
• -B787 option. Options installed are listed on unit’s serial tag.
• Windows XP/2000 PC with USB, LAN or National Instruments GPIB controller interface.
•
• Additional equipment will be required in order to meet all ABD directive test requirements.
Information on
California Instruments 144
User Manual Compact i/iX Series
14. Option –WHM: Watt Hour Meter measurements
The WHM measurement function can be accessed from the APPLICATIONS screen. Note that the -
WHM option is required for watt-hour measurements. If the –WHM is not installed – refer to the
OPTIONS menu – the watt-hour screen in the APPLICATIONS menu will be inactive.
To start watt-hour measurement, program the required output parameters of the power source and
apply the load. The output relay must be closed. From the APPLICATIONS menu, scroll down to th
WHM entry and press the Enter Key.
e
This will display the screen shown below. Scroll down using the down arrow key to select the elapsed
time screen.
The following fields are available:
WH AT r tog
ON or OFF. This will start and th s
WA : wat t reado
ETIME: This field will accumulate the time in hours, minutes and seconds.
PRE S e screen.
Not a il ement and will maintain the last data record for
the watt-hour meter. To restart the m e field is to the OFF position from the
ON position and the previous data will be reset to zeros.
M ST E: Select this field and p
stop
ess the ENTER key to
e watt-hour measurement
gle the watt-hour measurement mode
.
TT HR This field displays the t-hour measuremen ut.
VIOU SCREEN: Returns to th APPLICATIONS
e: Ch nging from ON to OFF w l stop the measur
easurements, th ggled to
California Instruments 145
User Manual Compact i/iX Series
15. Error Messages
Any s that occur during operation e l
result in error messages. Error messa the L so stored in
the me ich ing
queue has a finite depth. If more error messages are generated
queue overflow message will be put in the last queue location. T
que il t ult is recei
Errors appearing on the LCD will generally remain visible until the user moves to another screen. If
mul rro enerate la is
only space for one error message on the LCD display.
The same area of the display is also used to display status messages. While error messages always
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
航空资料11(160)
