曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
JAN 10/05
FIGURE 1 / GRAPHIC 25-23-08-991-001
25-23-08
Lou Martin & Assoc., Inc.
Component Maintenance Manual
TASK 25-23-08-870-802
2. Technical data
REVEAL INNER LENS OUTER LENS BLIND MOD. DECORATIV
MASK
ASSY. E HANDLE ASSY.
-1 A319-113M001-1 A320-113M2165-111 A320-113M2165-109 A320-113M2165-51 A319-113M004-1 A320-113M2165-41
-5 A319-113M001-43 A320-113M2165-115 A320-113M2165-109 A320-113M2165-55 A319-113M004-73 A320-113M2165-41
-7 A319-113M001-45 A320-113M2165-117 A320-113M2165-109 A320-113M2165-57 A319-113M004-75 A320-113M2165-41
-9 A319-113M001-55 A320-113M2165-111 A320-113M2165-109 A320-113M2165-51 A319-113M004-1 A320-113M2165-41
-11 A319-113M001-11 A320-113M2165-121 A320-113M2165-109 A320-113M2165-61 A319-113M004-11 A320-113M2165-41
-13 A319-113M001-13 A320-113M2165-123 A320-113M2165-109 A320-113M2165-63 A319-113M004-13 A320-113M2165-41
-15 A319-113M001-51 A320-113M2165-125 A320-113M2165-109 A320-113M2165-65 A319-113M004-61 A320-113M2165-43
-17 A319-113M001-17 A320-113M2165-127 A320-113M2165-109 A320-113M2165-67 A319-113M004-17 A320-113M2165-43
-19 A319-113M001-53 A320-113M2165-129 A320-113M2165-109 A320-113M2165-69 A319-113M004-63 A320-113M2165-43
-21 A319-113M001-41 A320-113M2165-131 A320-113M2165-109 A320-113M2165-71 A319-113M004-65 A320-113M2165-41
-23 A319-113M001-47 A320-113M2165-133 A320-113M2165-109 A320-113M2165-73 A319-113M004-67 A320-113M2165-41
-25 A319-113M001-25 A320-113M2165-135 A320-113M2165-109 A320-113M2165-75 A319-113M004-25 A320-113M2165-41
-27 A319-113M001-57 A320-113M2165-111 A320-113M2165-109 A320-113M2165-51 A319-113M004-1 A320-113M2165-41
-29 A319-113M001-55 A320-113M2165-111 A320-113M2165-109 A320-113M2165-51 A319-113M004-1 A320-113M2165-41
-31 A319-113M001-1 A320-113M2165-111 A320-113M2165-109 A320-113M2165-51 A319-113M004-77 A320-113M2165-41
-32 A319-113M001-1 A320-113M2165-111 A320-113M2165-109 A320-113M2165-51 A319-113M004-79 A320-113M2165-41
-33 A319-113M001-33 A320-113M2165-139 A320-113M2165-109 A320-113M2165-79 A319-113M004-33 A320-113M2165-41
-35 A319-113M001-35 A320-113M2165-141 A320-113M2165-109 A320-113M2165-81 A319-113M004-35 A320-113M2165-41
-37 A319-113M001-37 A320-113M2165-143 A320-113M2165-109 A320-113M2165-83 A319-113M004-69 A320-113M2165-41
-39 A319-113M001-39 A320-113M2165-145 A320-113M2165-109 A320-113M2165-85 A319-113M004-71 A320-113M2165-41
FIGURE 2/ GRAPHIC 25-23-08-991-002
PAGE 3
JAN 10/05
25-23-08
Lou Martin & Assoc., Inc.
Component Maintenance Manual
25-23-08
TESTING AND FAULT ISOLATION
TASK 25-23-08-700-801
1. Testing
A. General
(1) The tests check the different adjustments, components and mechanisms of
the window shade unit.
(2) The defective parts must be repaired in workshops or can be replaced by
serviceable parts.
B. Job set-up information
(1) Tools, fixtures, equipment and materials
NOTE: Refer to “SPECIAL TOOLS, FIXTURE AND EQUIPMENTS”
for full details on the items used.
C. Procedure
(1) Make sure the shade unit operates with the desired tension
PAGE 1001
JAN 10/05
Lou Martin & Assoc., Inc.
Component Maintenance Manual
25-23-08
TASK 25-23-08-700-802
2. Fault isolation
A. Faults you can find during the operations are given here under together with their
probable causes and their corrective actions.
B. After the necessary corrective action is done, do an inspection of the window unit
to make sure that the fault is corrected.
C. Mechanical fault isolation
TROUBLE POSSIBLE CAUSE CORRECTION
SHADE ASSY.
Shade assy. does not
operate with the desired
tension
Incorrect tension Adjust spring by resetting
ball catch as required to
add release tension
(Refer to section 3)
DECORATIVE MASK
Panel is loose Screws holding mask in
place are loose
Tighten attachment
screws
PAGE 1002
JAN 10/05
Lou Martin & Assoc., Inc.
Component Maintenance Manual
25-23-08
TASK 25-23-08-700-802
3. Procedure for adjusting shade tension
A. Remove window shade unit that requires adjustment from aircraft. See
(“UNINSTALLING WINDOW SHADE UNIT”, section 6 & 7 pages 3002 & 3003)
NOTE: Assure window unit lenses, plated parts, and decorative mask parts are
protected at all times when work is being done.
B. Locate tension spring at lower back of window housing. Tension assy. is secured in
place w/ stop nut and loop clamp.
C. To remove loop clamp, un-screw stop nut and slide clamp off retainer clip
D. Slide loop clamp & shrink tube to side w/ spring to access ball catch assy.
E. Adjust ball catch assy to desired tension (See FIGURE 3, GRAPHIC 25-23-08-991-
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
航空资料8(29)
