• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-11-09 15:23来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

B.  Remove Spring
(1)  
Remove forward bay cable cover plate from below the control stand as shown in Figure

402.

(2)  
Disconnect the autostow rod from the autostow assy by removing the attach bolt, washer and nut. See Figure 406.

(3)  
Remove complete mechanism from the control stand by removing 6 bolts and washers that attach the support fitting to the floor beam structure. See Figure 402, 404, 407.

(4)  
Remove spring per CMM supplement AP57.2-0613.


C.  Install Spring
(Reference CMM 27-60-10-01 in document AP57.2-0613.)

(1)  
For spring installation and adjustment, refer to supplement AP57.2-0613.

(2)  
Install complete autostow mechanism in the control stand and secure with the 6 bolts and washers that attach the support fitting to the floor beam structure. See Figure 402, 404, 407.

(3)  
Reconnect the autostow rod to the autostow assy by reinstalling the attach bolt, washer and nut. See Figure 406.

(4)  
Run Autostow System Ground Check per Supplement AMM 27-62-00-000-503.

(5)  
Run Spoiler Autostow and System Rigging procedure per supplement AMM 27-62-00-000-504.


Aviation Partners Boeing
757-200 MAINTENANCE MANUAL SUPPLEMENT  Part II
 TASK 27-62-01-000-403
3.  Speedbrake Autostow Controller (SAC) Removal and Installation
A.  General
(1)  To test Speedbrake Autostow Controller, run ground test per Supplement AMM TASK 27-62-01-000-503.
B.  SAC Removal
(1)  
Open the following circuit breakers and attach a “Do Not Close” tag.

(2)  
Locate SAC in the electronics bay. See Figure 408, 409, 410.

(3)  
Disconnect the electrical connector.

(4)  
Remove SAC attach hardware.

(5)  
Disconnect the bonding jumper from SAC by removing bolt,  washers, and nut.

(6)  
Remove SAC.


Circuit breaker panel  Circuit Name  C/B No. 
P6  SPDBRK AUTOSTOW  K22 
P11  AUTO SPEEDBRAKE SYSTEM  G11 

C.  SAC Replacement
(1)  
Attach bonding strap to SAC with bolt, washers and nut.

(2)  
Install SAC with bolt and washer, 4 places.

(3)  
Close the following circuit breakers:

(4)
Run Autostow System Ground Check per Supplement AMM TASK 27-62-01-000-503.


Circuit breaker panel  Circuit Name  C/B No. 
P6  SPDBRK AUTOSTOW  K22 
P11  AUTO SPEEDBRAKE SYSTEM  G11 

Aviation Partners Boeing
757-200

 
MAINTENANCE MANUAL SUPPLEMENT
 Part II      
Lower Portion of 
Speedbrake 
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:757-200 MAINTENANCE MANUAL SUPPLEMENT Part II 维护手册补充(18)