32-12-10
ALL ú ú 01 Page 601 ú Jun 20/90
A
757
MAINTENANCE MANUAL
SEE A
TRUNNION SEE B FAIRING DOOR
FWD INBD
PUSH ROD ASSEMBLY ASSEMBLY FORWARD HINGE STRUT DOOR
A A B B B B FITTING SUPPORT ASSEMBLY A ASSEMBLY AFT HINGE
A A
B TRUNNION FAIRING DOOR
Figure 601 (Sheet 1) Main Landing Gear Trunnion Fairing Door Wear Limits
32-12-10
ALL ú ú 01 Page 602 ú Jun 20/90
A
757
MAINTENANCE MANUAL
A-A
B-B
Main Landing Gear Trunnion Fairing Door Wear Limits
Figure 601 (Sheet 2)
32-12-10
ALL ú ú 01 Page 603 ú Jun 20/90
A
757
MAINTENANCE MANUAL
INDEX NO. PART NAME DIM. DESIGN LIMITS WEAR LIMITS REPLACE PART WORN REPAIR WORN PART REPAIR INSTR
DIAMETER PER-MITTED DIM. WEAR DIAM CLEAR-ANCE MAX
MIN MAX
1 BUSHING ID 0.3745 0.3755 0.3795 0.0050 X
BOLT OD 0.3735 0.3745 0.3705 X
2 HINGE ID 0.5000 0.5006 0.5016 0.00001 X
BUSHING OD 0.5010 0.5016 0.5000 X
3 BEARING ID 0.3745 0.3750 0.3795 0.0050 X
BOLT OD 0.3735 0.3745 0.3700 X
4 BUSHING ID 0.3750 0.3755 0.3795 0.0050 X
BOLT OD 0.3735 0.3745 0.3705 X
5 BUSHING ID 0.5620 0.5630 0.5665 0.0050 X
BUSHING OD 0.5610 0.5615 0.5580 X
6 HINGE ID 0.6875 0.6882 0.6893 0.00001 X
BUSHING OD 0.6887 0.6893 0.6875 X
7 BUSHING ID 0.4995 0.5005 0.5055 0.0060 X
BOLT OD 0.4985 0.4995 0.4945 X
8 FITTING ID 0.6250 0.6256 0.6267 0.0000 1 X
BUSHING OD 0.6261 0.6267 0.6250 X
9 BEARING ID 0.4995 0.5000 0.5045 0.0050 X
BOLT OD 0.4985 0.4995 0.4950 X
10 BUSHING ID 0.5000 0.5005 0.5045 0.0050 X
BOLT OD 0.4985 0.4995 0.4955 X
11 BUSHING ID 0.6870 0.6875 0.6810 0.0050 X
BUSHING OD 0.6860 0.6865 0.6825 X
12 FITTING ID 0.8125 0.8132 0.8144 0.00001 X
BUSHING OD 0.8137 0.8144 0.8125 X
INTERFERENCE FIT.
Main Landing Gear Trunnion Fairing Door Wear Limits
Figure 601 (Sheet 3)
32-12-10
ALL ú ú 01 Page 604 ú Jun 20/90
A
757 MAINTENANCE MANUAL
MAIN GEAR DOOR SEALS - REMOVAL/INSTALLATION
___________________________________________
1. General_______
A. This procedure contains two tasks. The first task removes the seals for the doors of the main landing gear. The second task installs the seals for the doors of the main landing gear.
TASK 32-12-51-004-001
2. Remove the Seals on the Doors for the Main Landing Gear (Fig. 401)_______________________________________________________
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 起落架 CHAPTER 32 - LANDING GEAR 1(164)
