757 
MAINTENANCE MANUAL
RAM AIR  
TURBINE  
(RAT)  
SEE  A  DEPLOYMENT ACTUATOR  
TOP  FOR THE RAM AIR  
ATTACHMENT  TURBINE  
SEE  C  SEE  B 
BOTTOM ATTACHMENT 
SEE D 
RAT STRUT HOUSING 
FWD 
RAM AIR TURBINE (RAT)
A
Deployment Actuator Installation 
Figure 401 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 29-21-05
 ALL  ú ú 01 Page 402 ú May 28/99 
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. 
A 
757 
MAINTENANCE MANUAL
Deployment Actuator Installation 
Figure 401 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 29-21-05
 ALL  ú ú 01 Page 403 ú May 28/99 
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. 
A
757 
MAINTENANCE MANUAL
 S 944-022
 (8)  Install the shipping sleeve on the actuator and place actuator in shipping container.
 TASK 29-21-05-424-009
 3.  Install the Deployment Actuator for the Ram Air Turbine (RAT)_____________________________________________________________
 A. Consumable Materials
 (1)  
D00013 Grease, MIL-G-23827
 (2)  
D00054 Hydraulic System Lubricant - MCS 352
 B. 
References
 (1)  
AMM 12-12-01/301, Hydraulic Systems
 (2)  
AMM 12-25-01/301, Exterior Cleaning
 (3)  
AMM 29-21-00/201, Ram Air Turbine (RAT) System
 C. 
Access
 (1)  
Location Zone
 198 Wing to Body - Aft Lower Half (Right)
 (2)  
Access Panel
 198MR RAT Compartment
 D. 
Install the Deployment Actuator (Fig. 401)
 S 644-025
 CAUTION: DO NOT INSTALL AN ACTUATOR THAT DOES NOT HAVE THE SHIPPING
_______ SLEEVE, P/N 1211233-800, AND IS NOT IN THE SHIPPING CONTAINER, P/N 1211233-801. REFER TO FEDERAL AVIATION ADMINISTRATION (FAA) AIRWORTHINESS DIRECTIVE, AD 99-05-10, FOR COMPLETE INFORMATION ON USA FEDERALLY MANDATED RAT ACTUATOR SHIPPING REQUIREMENTS.
 (1)  
Apply a layer of grease to all of the bushings.
S 944-023
 (2)  
Remove shipping sleeve from actuator.
S 434-011
 (3)  
Install the bolt, washer, and bushings to attach the deployment actuator to the actuator support fitting and tighten the bolt as follows:
 (a)  Tighten the bolt to 620-760 pound-inches.
 S 434-012
 (4)  Install the bolt, washers, bushings, and nut to attach the deployment actuator to the RAT strut housing and tighten the nut as follows:
 (a)  Tighten the nut to 630-1070 pound-inches.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 29-21-05
 ALL  ú ú 01 Page 404 ú May 28/01 
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. 
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:757 AMM 飞机维护手册 液压 CHAPTER 29 - HYDRAULIC POWER 2(83)