(3)  
Open these circuit breakers on the overhead panel, P11, and attach DO-NOT-CLOSE tags:
 (a)  11D31, HYDRAULIC PTU CONT
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 29-22-02
 ALL  ú ú 02 Page 401 ú May 28/99 
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. 
A
757 
MAINTENANCE MANUAL
LEFT MAIN  
WHEEL WELL  
SEE  A  
POWER TRANSFER  
UNIT (REF)  
FILTER MODULE FOR  
THE TRANSFER UNIT  
(PTU)  
SEE  B  
ELECTRICAL  
CONNECTOR  AFT 
OUTLET LINE 
DIFFERENTIAL PRESSURE INDICATOR 
SEE C 
WASHER (3 LOCATIONS) 
MOUNTING BOLT (3 LOCATIONS) 
INDICATION CONTROL PRESSURE SWITCH 
PRESSURE  
SWITCH  CHECK VALVE  LEFT MAIN WHEEL WELL  
SEE  E  A  
INLET LINE  
MOUNTING BRACKET 
ELECTRICAL 
CONNECTOR 
FILTER 
SEE D
FILTER MODULE
B
Filter Module Installation 
Figure 401 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 29-22-02
 ALL  ú ú 01 Page 402 ú Dec 20/90 
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. 
A
757 MAINTENANCE MANUAL 
FILTER MODULE 
FILTER MODULE HOUSING 
BACKUP RING 
O-RING 
O-RING 
CHECK VALVE
Filter Module Installation 
Figure 401 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 29-22-02
 ALL  ú ú 01 Page 403 ú Dec 20/90 
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. 
 E. 
F. 
G. 
A 
757 
MAINTENANCE MANUAL
 S 864-005
 (4)  Remove the pressure from the left and right hydraulic systems and
 the reservoirs (AMM 29-11-00/201).Remove the Filter Module
 S 034-006
 (1)  
Disconnect the electrical connectors from the pressure switches on the filter module.
S 034-007
 (2)  
Disconnect the hydraulic lines from the filter module.
S 024-008
 (3)  
Remove the bolts and the washers which hold the filter module.
S 034-009
 (4)  
Remove the unions from the filter module.
S 034-010
 (5) 
Remove the O-rings from the unions.Remove the Filter Element
 S 034-062
 CAUTION: DO NOT PRESSURIZE THE HYDRAULIC SYSTEM AFTER YOU REMOVE THE
_______ FILTER ELEMENT CASE. THIS CAN CAUSE DAMAGE TO THE FILTER MODULE OR THE CHECK VALVE.
 (1)  
Remove the filter element case from the filter module.
S 024-012
 (2)  
Remove the filter element from the filter module.
S 034-013
 (3)  
Remove the O-rings and the backup rings from the filter element
 case.Remove the Pressure Switches
 S 034-014
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:757 AMM 飞机维护手册 液压 CHAPTER 29 - HYDRAULIC POWER 2(140)