(10)
Connect the electrical connector to the left ACMP.
S 865-012
(11)
Remove the DO-NOT-CLOSE tag and close this circuit breaker on the P11 panel:
(a) R IND LT
S 215-013
(12)
Make sure the L ELEC HYD OVHT message does not show on the EICAS.
S 215-014
(13)
Make sure the L ELEC OVHT light on the hydraulic control panel is not on.
S 865-015
(14)
Open this circuit breaker on the P11 panel and attach a DO-NOT-CLOSE tag:
(a) L IND LTS 1
S 095-016
(15) Remove the jumper from the pins 1 and 3 of the electrical connector for the right ACMP.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
29-32-00
ALL ú ú 01 Page 504 ú Jun 20/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
S 435-017
(16)
Connect the electrical connector to the right ACMP.
S 865-018
(17)
Remove the DO-NOT-CLOSE tag and close this circuit breaker on the P11 panel:
(a) L IND LTS 1
S 215-019
(18)
Make sure the R ELEC HYD OVHT message does not show on the EICAS.
S 215-020
(19)
Make sure the R ELEC OVHT light on the hydraulic control panel is not on.
S 865-021
(20)
Open this circuit breaker on the P11 panel and attach a DO-NOT-CLOSE tag:
(a) R IND LTS 1
S 095-022
(21)
Remove the jumper from the pins 1 and 3 of the electrical connector for the center ACMP C1.
S 435-023
(22)
Connect the electrical connector to the center ACMP C1.
S 865-024
(23)
Remove the DO-NOT-CLOSE tag and close this circuit breaker on the P11 panel:
(a) R IND LTS 1
S 215-025
(24)
Make sure the C HYD 1 OVHT message does not show on the EICAS.
S 215-026
(25)
Make sure the C1 ELEC OVHT light on the hydraulic control panel is not on.
S 865-027
(26)
Open this circuit breaker on the P11 panel and attach a DO-NOT-CLOSE tag:
(a) L IND LTS 1
S 095-028
(27)
Remove the jumper from the pins 1 and 3 of the electrical connector for the center ACMP C2.
(28)
Connect the electrical connector to the center ACMP C2.
S 435-029
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
29-32-00
ALL ú ú 01 Page 505 ú Sep 20/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
S 865-030
(29) Remove the DO-NOT-CLOSE tag and close this circuit breaker on the P11 panel:
(a) L IND LTS 1
S 215-031
(30)
Make sure the C HYD 2 OVHT message does not show on the EICAS.
S 215-032
(31)
Make sure the C2 ELEC OVHT light on the hydraulic control panel is not on.
S 865-033
(32)
Open this circuit breaker on the P11 panel and attach a DO-NOT-CLOSE tag:
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 液压 CHAPTER 29 - HYDRAULIC POWER 2(166)
