757 MAINTENANCE MANUAL
S 034-006
(5)
Remove the pneumatic line from the valve (1).
S 034-007
(6)
Remove the bolts (5) from the bracket (4).
S 024-008
(7)
Remove the nut (2).
S 034-009
(8)
Remove the bracket (4) from the valve (1).
S 024-010
(9)
Remove the valve (1) from the reservoir.
S 034-011
(10)
Remove the O-ring (8) from the valve (1).
S 034-012
(11)
Install a cap on the opening on the reservoir.
TASK 29-11-25-404-013
3. Install the Valve (Fig. 401)_________________
A. Consumable Materials
(1) D00054 Hydraulic System Lubricant - MCS 352
B. Parts
(1) For the left system, refer to the table that follows:
~................................................................ | AMM | | AIPC | ............. ................................ | FIG |ITEM | NOMENCLATURE | SUBJECT |FIG |ITEM | .................................................................. | 401 | 1 | Vent Valve | 29-11-20 | 04 | 175 | | | 2 | Nut | | | 177 | | | 3 | Washer | | | 178 | | | 4 | Bracket Assy | | | 190,210,215 | | | 5 | Bolt | | | 195 | | | 6 | Washer | | | 200 | | | 7 | Nut | | | 205 | | | 8 | Packing | | | 185 | 2.....….....….....................…..........…....…..............1
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
29-11-25
ALL ú ú 01 Page 403 ú May 28/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
(2)
For the right system, refer to the table that follows:
~................................................................ | AMM | | AIPC | ............. ................................ | FIG |ITEM | NOMENCLATURE | SUBJECT |FIG |ITEM | .................................................................. | 401 | 1 | Vent Valve | 29-11-20 | 05 | 235 | | | 2 | Nut | | | 237 | | | 3 | Washer | | | 238 | | | 4 | Bracket Assy | | | 270,275,280 | | | 5 | Bolt | | | 255 | | | 6 | Washer | | | 260 | | | 7 | Nut | | | 265 | | | 8 | Packing | | | 240 | 2.....….....….....................…..........…....…..............1
(3)
For the center system, refer to the table that follows:
~................................................................ | AMM | | AIPC | ............. ................................ | FIG |ITEM | NOMENCLATURE | SUBJECT |FIG |ITEM | .................................................................. | 401 | 1 | Vent Valve | 29-11-22 | 05 | 160 | | | 2 | Nut | | | 162 | | | 3 | Washer | | | 163 | | | 4 | Bracket Assy | | | 130,135,155 | | | 5 | Bolt | | | 140 | | | 6 | Washer | | | 145 | | | 7 | Nut | | | 150 | | | 8 | Packing | | | 165 | 2.....….....….....................…..........…....…..............1
C. References
(1)
AMM 06-41-00/201, Fuselage Access Doors and Panels
(2)
AMM 29-11-00/201, Main (Left, Right, and Center) Hydraulic Systems
(3)
AMM 32-00-15/201, Landing Gear Door Locks
D.
Access
(1)
Location Zone
143/144 MLG Wheel Well
197 Wing to Body - Lower Half (Left)
(2)
Access Panels
197KL Central Hydraulic Service Center
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：757 AMM 飞机维护手册 液压 CHAPTER 29 - HYDRAULIC POWER 2(13)
