Page 7001
21-53-12 JUN 15/10
REFERENCE QTY NAME
No specific No specific 3 4 - zener diode DZX85C9 (Dz) - diode 1N4007 (D)
No specific 1 Standard tool kit for electronics' specialist
(2) Consumable Material
(a) Equivalent alternatives may be used for the listed items.
REFERENCE NAME
(M14A) LOCTITE 222 Locking compound
CAF 730 (white) Sealing compound
(M26C) AEROSHELL 7 Grease
RNF100 1/4 NOIRE TYPE1 Heat-shrinking sleeves (black)
DYNAFAST Cleaning solvent
(M05B) LOCTITE AS310 SILICOMET Bonding compound
21DRNATUREL Braid
(M01D) 6060 BT519 GREEN Varnish
(M42B) LOCTITE 574 INSTAJOINT Sealing compound
95° ETHYL ALCOHOL Cleaning fluid
KRYTOX 240 AZ Grease
No specific Solder (Sn5-Pb93,5-Ag1,5)
No specific Solder (Sn63-Pb37)
Page 7002
21-53-12
(3) Referenced Information
REFERENCE PAGE BLOCK DESIGNATION
(refer to TASK 21-53-12-200-801-A01) 5001 ACTUATOR - CHECKING
(refer to TASK 21-53-12-920-801-A01) 8001 ACTUATOR - FITS AND CLEARANCES
(refer to Page Block 10001) 10001 ILLUSTRATED PARTS LIST
(refer to Page Block 4001) 4001 ACTUATOR - CLEANING
(refer to TASK 21-53-12-920-802-A01) 8001 ACTUATOR - TORQUE VALUE TABLE
(refer to TASK 21-53-12-300-803-A01) 6001 REPAIR 03 - ACTUATOR - REPLACEMENT OF MOTOR PARTS
(refer to Subtask 21-53-12-820-001-A01) 7001 ADJUSTMENT OF THE BRAKE FRAMEWORK OF THE MOTOR (03-610B)
(Ref. to Fig. 7001) 7001 ACTUATOR - ADJUSTMENT OF THE MOTOR (03-610B)
(Ref. to Fig. 7002) 7001 ACTUATOR - ADJUSTMENT OF THE MOTOR (03-610A)
(Ref. to Fig. 7004) 7001 ACTUATOR - CAMS LOCATION
(refer to Page Block 2001) 2001 SCHEMATIC AND WIRING DIAGRAMS
(Ref. to Fig. 7005) 7001 ACTUATOR - ADJUSTMENT OF THE CLUTCH ASSEMBLY (02-190)
(refer to TASK 21-53-12-300-801-A01) 6001 REPAIR 01 - ACTUATOR - REPLACEMENT OF EQUIPPED CASE PARTS
(refer to TASK 21-53-12-300-802-A01) 6001 REPAIR 02 - ACTUATOR - REPLACEMENT OF EQUIPPED PLATE PARTS
(Ref. To Fig. 7006) 7001 ACTUATOR - PLAY BETWEEN GEAR OF THE BALL-SCREW AND THE BACK PLATES (02-290), (02-300)
(Ref. To Fig. 7007) 7001 ACTUATOR - INSTALLATION OF GEARS
(refer to Subtask 21-53-12-820-003-A01) 7001 ADJUSTMENT OF THE POTENTIOMETER
(refer to Subtask 21-53-12-820-004-A01) 7001 ADJUSTMENT OF THE CAMS AND SWITCHES
Page 7003
21-53-12 JUN 15/10
REFERENCE PAGE BLOCK DESIGNATION
(refer to TASK 21-53-12-300-804-A01) 6001 REPAIR 04 - ACTUATOR - REPAIR OF EQUIPPED COVER
(Ref. To Fig. 1) 0001 ACTUATOR - OVERALL DIMENSIONS
(Ref. To Fig. 7008) 7001 ACTUATOR - VARNISH AND LOCKWIRES LOCATION
(refer to TASK 21-53-12-700-801-A01) 1001 ACTUATOR - TESTING
C. Job Set-Up Subtask 21-53-12-210-003-A01
(1) Job before assembly CAUTION: REPAIR OR REPLACE THE PARTS WHICH ARE NOT WITHIN THE LIMITS.
(a)
Do a check of dimension parts (refer to TASK 21-53-12-200-801-A01).
(b)
Do a check of the Fits and Clearance (refer to TASK 21-53-12-920-801-A01).
(c)
Refer to IPL to see if any part has been modified or superseded by other parts (refer to Page Block 10001).
(d)
Clean parts before assembly (refer to Page Block 4001).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：LIEBHERR-AEROSPACE TOULOUSE SAS COMPONENT MAINTENANCE MANUAL(32)
