(2.00 to 26.00 lbf.ft) R No specific Torque Wrench : range 1.00 to 10.00 m.daN R (8.00 to 75.00 lbf.ft)
No specific Torque Wrench : range 2.00 to 20.00 m.daN
(15.00 to 150.00 lbf.ft) 98D27504028000 1 SPANNER-FLAP LEVER TRACKS 2 AND 3 98D27507536000 1 SOCKET WRENCH - RETAINER NUT, TRACK 1 98D27604000000 1 COLLAR-SAFETY, SPOILER
R 1EFF : ALL 1 27-54-55Page 428 1 1 Aug 01/05 1 1 1CES 1 B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-022
Material No. 05-002
Material No. 05-064 Material No. 09-018 Material No. 09-019 Material No. 11-026
Material No. 15-007 Material No. 19-003
C. Expendable Parts
USA MIL-PRF-81322 GRADE 2 SYNTHE.HYDROCARBON GREASE HIGH PRESSURE (Ref. 20-31-00)USA MIL-P-8116 PUTTY, ZINC CHROMATE GENERAL PURPOSE (Ref. 20-31-00)GB ABP1-4053 RELEASE AGENT (Ref. 20-31-00)USA AMS 3267/3 CORROSION INHIBITING LOW ADHESION SEALANT (Ref. 20-31-00)USA AMS 3267/3 LOW ADHESION CORROSION INHIBITING SEALANT (Ref. 20-31-00)GB DEF-STAN 68-148/1 SOLVENT GENERAL PURPOSE (Ref. 20-31-00)AIB TN 10138 TYPE II GRADE 1 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
2 cotter pin
R 9 cotter pin
R 9 cotter pin
10 cotter pin
14 cotter pin
R
14 bush
14 bush
15 lock plate
15 lock plate
29 cotter pin
30 cotter-pin
30 cotter-pin
30 cotter-pin
27-54-05 33F-035 27-54-05 33F-150 27-54-05 33U-15027-54-05 31B-03027-54-05 33F-040
57-51-33 14C-03057-51-33 14D-03057-51-33 14C-01057-51-33 14D-01027-54-05 31B-13027-54-05 33F-010F27-54-05 33F-010L27-54-05 33F-010M
R 1EFF : ALL 1 27-54-55Page 429 1 1 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
30 cotter-pin 27-54-05 33F-025 R 30 cotter-pin 27-54-05 33U-030 R 30 cotter-pin 27-54-05 33U-030A
37 cotter-pin 27-54-05 27A-010 37 cotter-pin 27-54-05 27B-010 38 cotter pin 27-54-05 27A-010 38 cotter pin 27-54-05 27B-010
D. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
27-50-00-000-002 Removal of the Inboard and Outboard Flap Hoisting-Sling 27-50-00-000-003 Removal of the Lock-Torque Shaft - Flaps and Slats
(98D27504030001) 27-50-00-866-008 Extension of the Flaps on the Ground 27-50-00-866-009 Retraction of the Flaps on the Ground 27-51-00-820-003 To Do a Check of the Flap Rigged Position (With the
Sharks Fin) 27-54-00-710-001 Operational Test of the Flap System 27-54-49-000-001 Removal of the Flap Track 1 Actuator 6205CM(6255CM) 27-54-49-000-002 Removal of the Flap Track 2 Actuator 6211CM(6261CM) 27-54-49-400-001 Installation of the Flap Track 1 Actuator
6205CM(6255CM)
27-54-49-400-002 Installation of the Flap Track 2 Actuator
6211CM(6261CM) 27-60-00-866-002 Extension-Retraction of the Spoilers for Maintenance 32-12-00-410-001 Close the Main Gear Doors after Access 53-35-11-000-001 Removal of the Wing-to-Fuselage Fairings 57-51-33-400-001 Installation of the No.1 Flap Track Beam 57-51-37-000-002 Removal of the Access Panels 573AB(673AB),
573BB(673BB), 573CB(673CB)
57-51-37-400-002 Installation of the Access Panels 573AB(673AB),
573BB(673BB), 573CB(673CB) 57-55-11-000-001 Removal of the Flap Track Fairings Nos. 2, 3 and 4 57-55-11-000-004 Removal of the Flap Track Fairings Nos. 2, 3 and 4 57-55-11-400-001 Installation of the Flap Track Fairings Nos. 2, 3 and
4 57-55-11-400-004 Installation of the Flap Track Fairings Nos. 2, 3 and 4
R 1EFF : ALL 1 27-54-55Page 430 1 1 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
**ON A/C 001-049, 051-061, 101-103, 201-203,
R 27-54-55-991-001 Fig. 401 **ON A/C 062-099, 104-105, 151-158, 204-210,
R 27-54-55-991-001-A Fig. 401A **ON A/C 106-149, 159-199, 211-299, 401-499,
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵5(171)
