B.
Access
(1)
Location Zones
113/114 Area Forward of NLG Wheel Well
211/212 Control Cabin
(2)
Access Panel
113AL Flight Control Components
C.
Prepare to Remove the Lever and the Cable
S 494-003
(1)
Make sure the chocks are below the wheels.
S 844-002
(2)
Release the parking brake.
D.
Remove the Lever and Cable Asembly
S 014-005
(1)
Remove the quadrant control stand panel, P10, to get access to the lever and cable assembly for the parking brake.
S 034-006
(2)
Remove the three cable retention clamps which are in the quadrant control stand (Details B and D).
(3)
Loosen the set screws.
S 034-008
32-44-01
ALL ú ú 04 Page 401 ú May 28/00
A
757
MAINTENANCE MANUAL
HANDLE
SEE F
SEE D
ACCESS P10 PANEL
PANEL SEE A SEE C
FLT COMPT PANEL P10
SEE B
SCREW
SEE E
CABLE CONTINUATION
CLAMP ON CAPTAIN'S RUDDER
PEDAL HOUSING
QUADRANT CONTROL STAND
CABLE ASSY A
CABLE ASSY
NUTPLATE SPACER
CLAMP
B RUDDERPEDAL ARMS
CABLE SCREW
BRACKET
C
CABLE ASSY
A
SCREW
CLAMP
A
NUTPLATE SPACER CAPTAIN'S RUDDER PEDAL HOUSING
D E
Parking Brake Lever/Cable Installation Figure 401 (Sheet 1)
32-44-01
ALL ú ú 01 Page 402 ú Mar 15/87
A
757
MAINTENANCE MANUAL
TEE
HANDLE
SETSCREW (2 LOCATIONS)KEY SLOT
IN THE CONTROL ACORN NUT
STAND PANEL
LOCKWASHER
CONTROL STAND THE ANTIROTATION PANEL (REF) NUT (ENGAGES THE KEY LUG ON
ANTIROTATION
KEY SLOT
IN THE PANEL)
CABLE ASSEMBLY
PARKING CABLE BRAKE BRACKET
ANTIROTATION NUT
INSTALLATION
F
CONTROL ARM
A-A
PIN
CONTROL
ARM
WASHER
Parking Brake Lever/Cable Installation
Figure 401 (Sheet 2)
32-44-01
ALL ú ú 02 Page 403 ú Jun 20/90
A
757
MAINTENANCE MANUAL
S 024-009
(4)
Remove the lever for the parking brake.
S 034-010
(5)
Remove the acorn nut which holds the end fitting for the cable to the quadrant control stand.
S 014-011
(6)
Open the forward access door, 113AL (AMM 06-41-00/201).
S 844-012
(7)
Find the cable for the parking brake. The cable is on the inboard side of the housing for the Captain's rudder pedal.
S 034-013
(8)
Remove the pin which holds the cable end of the control arm (Detail G).
S 034-014
(9)
Remove the clamp which holds the cable assembly to the support structure (Detail C).
S 034-015
(10)
Remove the lower jamnut which holds the cable to the bracket.
S 024-016
(11)
Remove the cable assembly.
TASK 32-44-01-404-017
3. Install the Lever and the Cable Assembly for the Parking Brake
______________________________________________________________
A. References
(1)
AMM 06-41-00/201, Fuselage Access Doors and Panels
(2)
AMM 32-44-00/501, Parking Brake System Adjustment
B.
Access
(1)
Location Zones
113/114 Area Forward of NLG Wheel Well
211/212 Control Cabin
32-44-01
ALL ú ú 01 Page 404 ú May 28/00
A
757 MAINTENANCE MANUAL
(2)
Access Panels
113AL Flight Control Components
C.
Install the Lever and Cable Assembly
S 034-018
(1)
Remove the lever and the acorn nut from the top of the cable assembly.
S 034-019
(2)
Remove the bottom jamnut from the lower end of the cable assembly.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 起落架 CHAPTER 32 - LANDING GEAR 3(61)
