S 735-094
(7)
Move the COMPUTER switch to the L position. Make sure the EICAS message PSEU BITE is shown on the bottom display.
(8)
Install a deactuator on sensor S10065.
S 495-095
32-61-00
ALL ú ú 01 Page 524 ú Jan 28/02
A
757 MAINTENANCE MANUAL
S 735-096
(9)
Make sure the amber GEAR light is on.
S 865-097
(10)
Erase the EICAS ECS/MSG AUTO EVENT page.
S 735-098
(11)
Make sure the EICAS message PSEU BITE is not shown on the bottom display.
S 735-188
(12)
Move the COMPUTER switch to the R position. Make sure the EICAS PSEU BITE message is not shown on the bottom display.
S 495-099
(13)
Install or remove the actuator or deactuator on the sensors in the list below:
SENSOR______ ACTUATOR________ DEACTUATOR__________
S10065 -- Remove
S10240 Remove --
S 735-100
(14)
Make sure the amber GEAR light is on.
S 495-101
(15)
Install or remove the actuator on the sensors in the list below:
SENSOR______ ACTUATOR S10240 Install S10239 Remove
S 735-102
(16)
Make sure the amber GEAR light is on.
S 495-103
(17)
Install or remove the actuator on the sensors in the list below:
SENSOR______ ACTUATOR S10239 Install S10238 Remove
S 735-104
(18)
Make sure the amber GEAR light is on.
S 495-105
(19)
Install an actuator on sensor S10238.
32-61-00
ALL ú ú 01 Page 525 ú Sep 20/96
A
757
MAINTENANCE MANUAL
S 865-106
(20)
Move the control lever for the landing gear to the OFF position.
S 735-107
(21)
Make sure the GEAR, RIGHT, LEFT, and NOSE lights are off.
S 495-108
(22)
Install a deactuator on sensor S10065.
S 095-109
(23)
Remove the actuators from sensors S10238, S10239 and S10240.
S 865-110
(24)
Erase the EICAS ECS/MSG AUTO EVENT page.
S 095-111
(25)
Remove the deactuators from sensors S10070, S10074, S10078 and S10079.
S 735-112
(26)
Make sure the indications that follow occur:
(a) The amber DOORS and GEAR lights are on.
(b) One half of each of the green NOSE, LEFT and RIGHT lights are
on.
(c) The EICAS message LDG GEAR MONITOR is shown on the bottom
display after 2 to 20 seconds.
(d) Make sure the EICAS messages in the list below show on the
bottom display:
NOSE GEAR DOWN
NOSE GEAR LOCKED
L GEAR DOWN
R GEAR DOWN
S 735-113
(27)
Move the COMPUTER switch to the L position. Make sure the EICAS message LDG GEAR MONITOR is shown on the bottom display.
(a)
Make sure the EICAS messages in the list below show on the bottom display:
NOSE GEAR DOWN NOSE GEAR LOCKED L GEAR DOWN R GEAR DOWN
32-61-00
ALL ú ú 01 Page 526 ú Sep 20/96
A
757
MAINTENANCE MANUAL
S 495-114
(28) Install deactuators on the sensors in the list below:
SENSOR
______ S10070 S10074 S10078 S10079
S 735-115
(29)
Make sure the indications that follow occur:
(a)
The green NOSE, RIGHT, and LEFT lights are off.
(b)
The amber DOORS and GEAR lights are on.
S 865-116
(30)
Erase the EICAS ECS/MSG AUTO EVENT page.
S 735-117
(31)
Make sure the EICAS message LDG GEAR MONITOR is not shown on the bottom display.
S 495-118
(32)
Install or remove the actuators or deactuator on the sensors in the list below:
SENSORS_______ ACTUATOR________ DEACTUATOR__________
S10070 -- Remove
S10076 Install --
S10081 Install --
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 起落架 CHAPTER 32 - LANDING GEAR 3(153)
