• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-26 00:27来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者


 2.
 Job Set-up Information


______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
33-13-00-710-001  Operational Test of the Instrument and Panel Integral Lighting 34-14-00-740-001 Interface Test of the IR
 3. Job Set-up
__________ Subtask 34-57-22-865-051
 A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU NAV/VOR/DME/RMI 12FN F13 49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09 122VU LIGHTING/INSTL LT/MAIN INST/PNL AND/PED 4LF Y04
 4. Procedure
_________ Subtask 34-57-22-420-050
 A. Installation of the VOR/DME RMI
 (1)
 Clean the component interface and/or the adjacent area.

 (2)
 Do an inspection of the component interface and/or the adjacent area.

 (3)
 Remove the blanking caps from the electrical connectors (3) and (4).


R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 34-57-22Page 404 1 1 Config-1 May 01/05 1 1 1CES 1


 (4)
 Make sure that the electrical connectors are clean and in the correct


 condition.

 (5)
 Connect the electrical connector (4) to the VOR/DME RMI (2).

 (6)
 Install the VOR/DME RMI (2) in its housing.


 (7) Tighten the screws (1). Subtask 34-57-22-865-052
 B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 12FN, 8FP, 4LF
 Subtask 34-57-22-710-050
 C. Test of the VOR/DME RMI
 (1)
 Do the BITE test of the IR1 and IR3 systems (but read only the heading value on the RMI). (Ref. TASK 34-14-00-740-001)

 (2)
 Do the operational test of the instrument and panel integral lighting (Ref. TASK 33-13-00-710-001).


 5. Close-up
________ Subtask 34-57-22-410-050
 A. Put the aircraft back to its initial configuration.
 (1)
 Install the thermoformed cover on the center instrument panel.

 (2)
 Make sure that the work area is clean and clear of tool(s) and other items.


R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 34-57-22Page 405 1 1 Config-1 May 01/05 1 1 1CES 1


 RMI - VOR/ADF/DME (21FN) - REMOVAL/INSTALLATION
_______________________________________________ TASK 34-57-22-000-002 Removal of the VOR/ADF/DME RMI (21FN)
 1.
 Reason for the Job

__________________
 Self Explanatory


 2.
 Job Set-up Information


______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps
 No specific circuit breaker(s) safety clip(s)

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
34-57-22-991-002 Fig. 401
 3. Job Set-up
__________ Subtask 34-57-22-865-053
 A. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU NAV/VOR/DME/RMI 12FN F13 49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09 122VU LIGHTING/INSTL LT/MAIN INST/PNL AND/PED 4LF Y04
 Subtask 34-57-22-010-051
 B. Remove the thermoformed cover from the center instrument panel.
R 1EFF : 106-149, 201-299, 301-399, 401-499, 1 34-57-22Page 401 1 1 Config-2 Aug 01/05 1 1 1CES 1


 4. Procedure
_________
 (Ref. Fig. 401/TASK 34-57-22-991-002) Subtask 34-57-22-020-051
 A. Removal of the VOR/ADF/DME RMI
 (1)
 Loosen the screws (1), do not remove them.

 (2)
 Disengage the VOR/ADF/DME RMI (2) from its housing.

 (3)
 Disconnect the electrical connector (4).

 (4)
 Remove the VOR/ADF/DME RMI (2).

 (5)
 Put blanking caps on the disconnected electrical connectors (3) and (4).


R 1EFF : 106-149, 201-299, 301-399, 401-499, 1 34-57-22Page 402 1 1 Config-2 Aug 01/05 1 1 1CES 1
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM NAVIGATION 导航4(182)