• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-26 00:27来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者


 2.
 Job Set-up Information


______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific ground test unit
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
 from the External Power 34-10-00-860-002 ADIRS Start Procedure 34-10-00-860-004 IR Alignment Procedure 34-10-00-860-005 ADIRS Stop Procedure 34-55-00-991-001 Fig. 501
R 1EFF : ALL 1 34-55-00Page 512 1 1 May 01/05 1 1 1CES 1


 3. Job Set-up
__________
 Subtask 34-55-00-865-053

 A. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU NAV/VOR/DME/RMI 12FN F13 49VU NAV/VOR/1 2RS1 G13 121VU COM NAV/VOR/2 2RS2 K08
R **ON A/C 001-049, 051-099, 101-105, 151-199,
 Subtask 34-55-00-860-052
 B. Aircraft Maintenance Configuration
 (1)
 Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002)

 (2)
 Install the ground test unit near the VOR or MKR antenna as shown in the installation instructions.

 (3)
 Do the ADIRS start procedure (Ref. TASK 34-10-00-860-002).

 (4)
 Do the IR alignment procedure (Ref. TASK 34-10-00-860-004).

 (5)
 On the EFIS control sections of the FCU:

 -set the ADF/VOR selector switches to VOR and the mode selector switches to ROSE/VOR.
 -push the ILS pushbutton switches.

 (6)
 On the center pedestal, on one ACP, set the VOR1 (2) or MKR reception.

 (7)
 On the center pedestal, on the RMP1 and RMP2:


 -set the ON/OFF selector switch to ON.
 1EFF : ALL 1 34-55-00Page 513 1 1 May 01/05 1 1 1CES 1R **ON A/C 106-149, 201-299, 301-399, 401-499,

 

 Subtask 34-55-00-860-052-A
 B. Aircraft Maintenance Configuration
 (1)
 Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002)

 (2)
 Install the ground test unit near the VOR or MKR antenna as shown in the installation instructions.

 (3)
 Do the ADIRS start procedure (Ref. TASK 34-10-00-860-002).

 (4)
 Do the IR alignment procedure (Ref. TASK 34-10-00-860-004).

 (5)
 On the EFIS control sections of the FCU:

 -set the ADF/VOR selector switches to VOR and the mode selector switches to ROSE/VOR.
 -push the ILS pushbutton switches.

 (6)
 On the center pedestal, on one ACP, set the VOR1 (2) or MKR reception.

 (7)
 On the center pedestal, on the RMP1 and RMP2:

 -set the ON/OFF selector switch to ON.

 (8)
 On the VOR/ADF/DME RMI:


 -set the VOR/ADF selector switches to VOR.
R 1EFF : 106-149, 201-299, 301-399, 401-499, 1 34-55-00Page 514 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL


 4. Procedure
_________ R **ON A/C 001-049, 051-099, 101-105, 151-199,
 Subtask 34-55-00-720-050
 A. Test of the VOR Reception and Identification
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the test unit:
 -set the frequency of the VOR test unit and then set a bearing of 0..
 2. On the RMP1 (RMP2):
 -
push the NAV pushbutton switch.

-
push the VOR pushbutton switch.


-set the VOR1 (VOR2) frequency of the VOR test unit and then set a course of C000 . (Ref. Fig. 501/TASK 34-55-00-991-001)On the RMP, the green LED on this pushbutton switch comes on.
On the RMP, the green LED on this pushbutton switch comes on.
On the RMP1 (RMP2):
-
the frequency comes into view in theleft window.

 -
the course comes into view in the

 right window. On the CAPT and F/O NDs:

 -
the VOR1 (VOR2) frequency and the CRS 000 indications come into view in the top right corner.

 -
the VOR1 (VOR2) indication and the VOR1 (VOR2) frequency come into view in the left (right) lower corner.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM NAVIGATION 导航4(173)