R 4. Procedure_________
R Subtask 31-32-00-740-057
R A. Read the POST FLIGHT REPORT for TPIU Class 2 Maintenance Messages
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R 1. Adjust the brightness of the MCDU
R 1 screen.
R - push the MCDU MENU mode key.
R 2. On the MCDU 1:
R - push the line key adjacent to
R the CFDS indication.
R - push the line key adjacent to
R the POST FLIGHT REP PRINT *
R indication.
-
the MCDU 1 is on.
-
the MCDU MENU page comes into view. On the MCDU 1:
-
the CFDS menu page comes into view.
-The printer prints the POST FLIGHT REPORT pages.
R 3. On the printed report, read the list of FAILURE MESSAGES for TPIU Class 2
R messages (SOURCE column):
R - if there are no Class 2 failure messages, go to the close-up para.
R - if there are Class 2 failure messages, do the operational test of the Tire
R Pressure Indicating System (Ref. TASK 32-49-00-710-001).
R 5. Close-up
________ R Subtask 31-32-00-860-053 R A. Put the aircraft back to its initial configuration. R (1) On the MCDU, push the line key adjacent to the RETURN indication
R until the CFDS menu page comes into view.
R (2) De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-R 002).
R 1EFF : 051-099, 1 31-32-00Page 517 1 1 May 01/05 1 1 1CES 1R **ON A/C ALL
TASK 31-32-00-740-009
Read the AVIONICS STATUS on the MCDU
1. Reason for the Job
__________________
To get the AVIONICS STATUS page on the ground. This page gives a real-time list of the units or systems for which:
-
there is an internal or external Class 1 or 2 fault (for example: AFS).
-
there is an internal or external Class 3 fault. The (CLASS 3) indication is shown near the name of the unit (for example: AEVC (CLASS 3)).
-no valid data is available. For this, the indication is NO X DATA in which X is the name of the unit or system (for example: NO ATSU DATA).
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power
3. Job Set-up
__________
Subtask 31-32-00-861-081
A. Aircraft Maintenance Configuration
(1)
Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).
(2)
On the overhead panel, make sure that:
(a) The ON legend of the APU/MASTER SW, ENG/FADEC GND PWR/1 and ENG/FADEC GND PWR/2 pushbutton switches is on.
1EFF : ALL 1 31-32-00Page 518 1 1 May 01/05 1 1 1CES 1
(b)
The OFF or FAULT legend of the ELEC/BAT 1, ELEC/BAT 2, ADR 1, ADR 2 and ADR 3 pushbutton switches is not on.
(c)
The OFF/NAV/ATT selector switches related to the IR 1, IR 2 and IR 3 are at NAV.
Subtask 31-32-00-865-087
B. Make sure that this(these) circuit breaker(s) is(are) closed: -------------------------------------------------------------------------------
PANEL ------ DESIGNATION --------------------------------------- --------------- IDENT. LOCATION-------------------
49VU AUTO FLT/MCDU/1 11CA1 B01
121VU CFDS/CFDIU/SPLY 2TW J18
121VU AUTO FLT/MCDU/2 11CA2 N20
**ON A/C ALL
Post SB 31-1163 For A/C 155-156,208-209,
121VU CFDS/CFDIU/BACK/UP 8TW J17
**ON A/C ALL
4. Procedure_________
Subtask 31-32-00-740-058
A. Do this procedure:
---------------------------------------------ACTION ---------------RESULT -------------------
------------------------------------------------------------------------------- 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：A320飞机维护手册 AMM 指示/记录系统 2(49)
