A320飞机维护手册 AMM 指示/记录系统 2(39)_航空信息_民用航空_通用航空

4. Procedure
_________
**ON A/C 201-203,

Subtask 31-32-00-970-052
A. Loading Procedure
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the overhead panel, on the Data Loading Selector:
-set the ON/OFF switch to ON.
R
2. On the overhead panel, on the
Data Loading Selector: R - push the PREV or NEXT key until R you get the indication of the R CFDIU.
R 3. On the multipurpose disk drive R unit: R - Put the disk of the maintenance R filter data base into the disk R drive , the label in the R forward direction.
4. On the overhead panel, on the
Data Loading Selector: R - push the SEL CTL key. R R On the display of the Data LoadingSelector:
-DB/N: PUSH NEXT/PREV indication is shown.
On the multipurpose disk drive unit:
-the < < MDDU READY > > indication is shown.
On the display of the Data LoadingSelector:
-CFDIU NOT SELECTED indication is shown.
On the multipurpose disk drive unit:
-the READY indication is shown.
-then the WAIT RESPONSE indication is shown.
On the display of the Data LoadingSelector:
-CFDIU SELECTED indication is shown.
On the multipurpose disk drive unit:
-the TRANS IN PROG indication is shown
R 1EFF : 106-149, 151-199, 201-299, 301-399, 1 31-32-00Page 307 1401-499, 1Aug 01/05 1 1 1CES 1

-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
R - when all the data is loaded in the
R CFDIU, the TRANSF COMPLETE indication
R is shown.
R 5. If the WAIT RESPONSE is shown
R continuously on the MDDU:
R - open the circuit breaker 3TD.
R - eject the disk from the disk
R drive of the MDDU.
R - after one minute, close the
R circuit breaker 3TD.
R - do the step 3.again.
R 6. On the overhead panel, on the On the display of the Data Loading
Data Loading Selector: Selector:
R - push the SEL CTL key. - CFDIU
NOT SELECTED
R indication is shown.
R 7. Eject the disk from the disk On the multipurpose disk drive unit:
R drive of the data loader - the < < MDDU READY > > indication is
R shown.

R NOTE : The upload operation is satisfactory when:____
R - the TRANSF COMPLETE indication is shown on the multipurpose disk
R drive unit, and
R - you get an automatic printout of the uploaded data base (it is
R possible that you do not get a full print: some data and/or
R pages can be missing).

R 1EFF : 201-203, 1 31-32-00Page 308 1 1 Aug 01/05 1 1 1CES 1

R **ON A/C 106-149, 151-199, 201-299, 301-399, 401-499, Post SB 31-1130 For A/C 201-203, Subtask 31-32-00-970-052-A
A. Uploading of the Database
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the overhead panel, on the Data Loading Selector:
-set the ON/OFF switch to ON.
R
2. On the overhead panel, on the Data Loading Selector:
-push the PREV or NEXT key until you get the CFDIU indication.
R 3. On the Multipurpose Disk Drive R Unit (MDDU): R - Put the disk of the maintenance R filter data base into the disk R drive, the label in the forward R direction.
4. On the overhead panel, on the
Data Loading Selector: R - push the SEL CTL key. R On the display of the Data LoadingSelector:
-DB/N: PUSH NEXT/PREV indication is shown.
On the Multipurpose Disk Drive Unit (MDDU):
-the < < MDDU READY > > indication is shown.
On the display of the Data LoadingSelector:
-CFDIUNOT SELECTED indication is shown.
On the MDDU:
-the READY indication is shown.
-then the WAIT RESPONSE indication is shown.
On the display of the Data LoadingSelector:
-CFDIU SELECTED indication is shown.
On the MDDU:
-the BUS n: xxxxxxx indication is shown.
R 1EFF : 106-149, 151-199, 201-299, 301-399, 1 31-32-00Page 309 1401-499, 1Aug 01/05 1 1 1CES 1