R **ON A/C 106-149, 155-199, 208-299, 301-399, 401-499,
Subtask 31-32-00-970-053-A
A. Activation/Deactivation procedure
NOTE : The actions and the results of this procedure occur on the MCDU
____
used.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
Adjust the brightness of the MCDU
screen.
2.
Push the MCDU MENU mode key. The MCDU MENU page comes into view.
3.
Push the line key adjacent to the The CFDS menu page comes into view. CFDS indication.
4.
Push the NEXT PAGE function key.
5.
Access to the REPORTS PROGRAMMING
page without an active password:
-push the line key adjacent to The REPORTS PROGRAMMING page comes into the REPORTS PROGRAMMING view. indication.
6. Access to the REPORTS PROGRAMMING
page with a password:
NOTE : This item is available
____
only after selection of
the password mode (access
with a password).
NOTE : If you are in transparent
____
mode (free access), the
ENTER PASSWORD page does
not come into view.
-push the line key adjacent to The ENTER PASSWORD page comes into the REPORTS PROGRAMMING view. indication.
R 1EFF : 106-149, 155-199, 208-299, 301-399, 1 31-32-00Page 324 1401-499, 1Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-with the MCDU keyboard, enter
the password.
-push the line key adjacent to The REPORTS PROGRAMMING page comes into the ENTER indication. view.
7. To change the programming:
-push the right line key The programming display changes to: adjacent to the POST FLT REP indication. YES*: to activate the automatic Post
Flight Report printout
NO*: to deactivate the automatic Post Flight Report printout.
**ON A/C ALL
5. Close-up
________ Subtask 31-32-00-860-114
A. Put the aircraft back to its initial configuration.
(1) On the MCDU, push the line key adjacent to the RETURN indication until the CFDS menu page comes into view.
(2)
Fully decrease the brightness of the MCDU screen (display off). Subtask 31-32-00-862-064
B.
De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
1EFF : ALL 1 31-32-00Page 325 1 1 Aug 01/05 1 1 1CES 1 CENTRALIZED FAULT DISPLAY INTERFACE (CFDIU) - ADJUSTMENT/TEST
_____________________________________________________________ R **ON A/C 001-049, 051-099, 101-105, 151-154, 201-207,
TASK 31-32-00-710-002 Operational Test of the Back-up Mode NOTE : IGNORE ALL THE ECAM WARNINGS AS LONG AS THE COMPUTER IS IN THE MENU
____
MODE.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power
3. Job Set-up
__________
Subtask 31-32-00-861-053
A. Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002). Subtask 31-32-00-865-053
B. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
49VU AUTO FLT/MCDU/1 11CA1 B01 121VU CFDS/CFDIU/SPLY 2TW J18 121VU CFDS/CFDIU/BACK/UP 8TW J17
1EFF : ALL 1 31-32-00Page 501 1 1 May 01/05 1 1 1CES 1
4. Procedure
_________ Subtask 31-32-00-710-051
A. Do this test:
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM 指示/记录系统 2(44)