A320飞机维护手册 AMM 指示/记录系统 2(43)_航空信息_民用航空_通用航空

曝光台注意防骗网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

page with a password:
NOTE : This item is available____
only after selection of
the password mode (access
with a password).
NOTE : If you are in transparent____
mode (free access), the
ENTER PASSWORD page does
not come into view.
- push the line key adjacent to The ENTER PASSWORD page comes into
the PFR FILTER PROGRAM view.
indication.
- with the MCDU keyboard, enter
the password.
- push the line key adjacent to The PFR/FILTER PROGRAM page comes into
the ENTER indication. view.
7. To change the programming:
- push the line key adjacent to The programming display changes to the
the *YES FILTER ACTIVATED *NO FILTER ACTIVATED indication.
indication if shown
NOTE : When the *NO FILTER ACTIVATED____
indication is shown, there is no
filtering of the Post Flight
Report (PFR).
or

R 1EFF : 106-149, 155-199, 208-299, 301-399, 1 31-32-00Page 320 1401-499, 1Aug 01/05 1 1 1CES 1

-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-push the line key adjacent to The programming display changes to the the *NO FILTER ACTIVATED *YES FILTER ACTIVATED indication. indication if shown.
NOTE : When the *YES FILTER ACTIVATED
____ indication is shown, there is filtering of the Post Flight Report (PFR).
**ON A/C ALL
5. Close-up
________
Subtask 31-32-00-860-104
A. Put the aircraft back to its initial configuration.
(1)
On the MCDU, push the line key adjacent to the RETURN indication until the CFDS menu page comes into view.

(2)
De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).

(3)
Put the system back to the serviceable condition.

(4)
Put the aircraft back to the serviceable condition.

1EFF : ALL 1 31-32-00Page 321 1 1 Aug 01/05R 1 1 1CES 1

TASK 31-32-00-610-002 Activation/Deactivation of the Automatic Post Flight Report Printout
1.
Reason for the Job

__________________
Self Explanatory

2.
Job Set-up Information

______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power
3. Job Set-up
__________ Subtask 31-32-00-861-079
A. Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002). Subtask 31-32-00-865-085
B. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/MCDU/1 11CA1 B01 121VU CFDS/CFDIU/SPLY 2TW J18 121VU AUTO FLT/MCDU/2 11CA2 N20
**ON A/C ALL
Post SB 31-1163 For A/C 155-156,208-209,
121VU CFDS/CFDIU/BACK/UP 8TW J17
1EFF : ALL 1 31-32-00Page 322 1 1 Aug 01/05R 1 1 1CES 1

**ON A/C ALL
4. Procedure
_________ **ON A/C 001-049, 051-099, 101-105, 151-154, 201-207,
Subtask 31-32-00-970-053
A. Activation/Deactivation Procedure NOTE : The actions and the results of this procedure occur on the MCDU
____
used.

2.
Push the MCDU MENU mode key.

3.
Push the line key adjacent to the CFDS indication.

4.
Push the NEXT PAGE function key.

5.
Push the line key adjacent to the ACARS PRINT PROGRAM indication.

6.
To change the programming:

-Push the right line key adjacent to the POST FLT REP indication.
The MCDU MENU page comes into view.The CFDS menu page comes into view.
The ACARS/PRINT PROGRAM page comes intoview.
The programming display changes to:
YES*: to activate the automatic Post Flight Report printout
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 指示/记录系统 2(43)