/49
As soon as the system pb is released the
E/WD returns and the light on the ECAM
Control Panel is extinguished.
EIS MENU
Reconfiguration 29/49
When you are limited to a single ECAM
screen the handling of system malfunctions
and how you are advised of failures is slightly
different. For clarity we will concentrate on the
ECAM screen.
If an advisory condition arises, the relevant
system page is not automatically displayed.
Instead the light on the pb switch for the
system and a boxed ADV message on the
E/WD will flash.
EIS MENU
Reconfiguration 30/49
If an ECAM warning or caution is triggered
then there will be no automatic display of the
relevant system page. System pages should
be called by manual selection on the ECAM
Control Panel. To see this more clearly let’s
look at a failure. We will only discuss the one
ECAM screen and the selections on the ECAM
Control Panel.
EIS MENU
Reconfiguration 31/49
You hear a single chime and see the
MASTER CAUTION light.
Cancel the MASTER CAUTION
EIS MENU Reconfiguration 32/49
No, to extinguish the Master Caution light, click on the
Master Caution pb.
EIS MENU Reconfiguration 33/49
No, to extinguish the Master Caution light, click on the
Master Caution pb.
EIS MENU Reconfiguration 34/49
TThheeMASTTER CAUTTIION iiss eexxttiinngguuiisshheedd
EIS MENU
Reconfiguration 35/49
When a failure is detected ECAM will give
the normal aural and visual indications. On the
E/WD the failure message will be displayed and
on the ECAM Control Panel the two CLR keys
will be illuminated.
F/O ND SCREEN F/O PFD SCREEN
EIS MENU
Reconfiguration 36/49
By looking at the underlined system title you
can see which system page needs to be
viewed. In this example the FUEL page pb
should be selected and held on the ECAM
Control Panel. The system page can be studied
to provide more information about the failure
and then the pb released.
EIS MENU
Reconfiguration 37/49
The E/WD returns and the ECAM actions can
be carried out. We will do these actions for
you.
EIS MENU Reconfiguration 38/49
EIS MENU
Reconfiguration 39/49
Now that the ECAM actions have been
completed there is only the failure title
remaining. To confirm what effect the actions
have had on the system reselect the FUEL page
on the ECAM Control Panel.
Call the FUEL page.
EIS MENU
Reconfiguration 40/49
As before the FUEL page is displayed while
the pushbutton is depressed. You can see on
the system page that the cross-feed is
connected and the pump has shut down.
EIS MENU
Reconfiguration 41/49
As soon as the pushbutton is released the
E/WD returns.
EIS MENU
Reconfiguration 42/49
To continue with ECAM a CLR key should be
pressed to remove the failure message on the
E/WD.
Clear FUEL
EIS MENU
Reconfiguration 43/49
Normally the Status page would be
displayed but with only a single ECAM screen
available the STATUS page must be manually
selected. Notice that there is a boxed STS
symbol on the E/WD.
EIS MENU
Reconfiguration 44/49
The STATUS pushbutton should be held
down and the STATUS page reviewed. The
STATUS page can be displayed for up to 3
minutes before an automatic return to the
E/WD occurs.
EIS MENU Reconfiguration 45/49
EIS MENU
Reconfiguration 46/49
Once the review is complete the pushbutton
is released and the E/WD returns.
EIS MENU
Reconfiguration 47/49
The ECAM procedure is now complete.
There are no lights on the ECAM Control Panel.
EIS MENU
Reconfiguration 48/49
During the approach phase there is no
automatic call of the STATUS page when the
Flap selector is moved. To remind the pilots to
review STATUS the boxed STS symbol on the
E/WD pulses.
The STATUS page should be selected as
before.
EIS MENU Reconfiguration 49/49
In this module we have looked at various
failures associated with the EIS.
You will have the opportunity to practice
the various failures during the simulator
phase.
MMoodduulleeCCoommpplleettee
NEXT
EIS MENU Reconfiguration 50/49
LLIISSTTOOFFSSUUBBJJEECCTTSS
EXIT
AUDIO GLOSSARY FCOM
RETURN
DDMMCC11FFAAUULLTT
PPFFDDSSCCRREEEENNFFAAUULLTT
UUPPPPEERREECCAAMMSSCCRREEEENNFFAAUULLTT
BBOOTTHHEECCAAMMSSCCRREEEENNSSFFAAUULLTT
ECAM MENU Abnormal Operation 1/38
ECAM MENU
Abnormal Operation 2/38
AIRCRAFT SYSTEM SENSORS
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：空客a320飞机概述2
