• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-10-31 15:52来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

(1) Stringer (Internal) From Direction 1, using visual inspection methods.
Access:  Defuel and purge tanks (S3051, S4051).  Remove lower wing access panels 7204, 7404 and inspar rib access panels* 7225, 7425.
* Do NOT remove more than one panel per rib unless engine is removed. Zone(s): 305, 405.
(2) Stringer (Internal) From Direction 2, using Ultrasonic (Ref. NDT Manual D6-37239, Part 4, 57-10-02).
Access:  Defuel and purge tanks (S3051, S4051).  Remove lower wing access panels 7204, 7404 and inspar rib access panels* 7225, 7425.
* Do NOT remove more than one panel per rib unless engine is removed. Zone(s): 305, 405.
(3) Stringer (Internal) From Direction 3, using HFEC (Ref. NDT Manual D6-37239, Part 6, 57-30-07).
0.4 elapsed hours and 0.4 manhours are required to accomplish this inspection.
Access:  Defuel and purge tanks (S3051, S4051).  Remove lower wing access panels 7204, 7404 and inspar rib access panels* 7225, 7425.
* Do NOT remove more than one panel per rib unless engine is removed. Zone(s): 305, 405.
8.1   WING SSI INFORMATION D6-82669 Original

V. INSPECTION OPTIONS - DTR CHECK FORM W-27E
Stringer 5 - from WBL 336.0 to WBL 406.0.
Stringer 9 - from WBL 296.5 to WBL 384.0.

(1) Stringer
(Internal) From Direction 1, using visual inspection methods.

Access:  Defuel and purge tanks (S3051, S4051). Remove lower wing access panels 7210, 7211, 7212, 7410, 7411, 7412.
Zone(s):  305, 405.
Original  D6-82669 8.1 WING SSI INFORMATION


8.1  WING SSI INFORMATION D6-82669 Original


Original D6-82669 8.1 WING SSI INFORMATION


8.1  WING SSI INFORMATION D6-82669 Original

W27D_PDFW

Original D6-82669 8.1 WING SSI INFORMATION


8.1  WING SSI INFORMATION D6-82669 Original

 


8.2 FUSELAGE SSI INFORMATION
This section contains the basic inspection and access information needed to complete the Fuselage DTR Check Forms in Section 11.2.  A listing of the Fuselage SSI/DTR Check Forms by Model-Series applicability is shown below.  The SSI Numbers are not continuously consecutive, as some items were eliminated from the program or combined with other items after the number sequence was assigned.  A structural inspection matrix, showing the inspection zone-area for each item, is shown on Pages 8.2.3 through 8.2.4.
Table 1: FUSELAGE SSI NUMBER AND DTR CHECK FORM APPLICABILITY
SSI NUMBER  TITLE  DTR CHECK FORMS  APPLICABLE  737 
-300  -400  -500 
F-1  FORWARD AND AFT LOWER CARGO DOORS  F-1  ALL  ALL  ALL 
F-9  CUTOUT - ELECTRONIC EQUIPMENT COMPARTMENT ACCESS DOOR  F-9  ALL  ALL  ALL 
F-10  FORWARD CARGO DOOR CUTOUT  F-10A, B, C  ALL  ALL  ALL 
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:737-300/400/500 补充结构检查文件 SUPPLEMENTAL STRUCTURAL INSPECTION DOCUMENT 1(43)