曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
ú 531AB Center Tank Access Door (Left)
ú 531BB Center Tank Access Door (Left)
ú 531CB Center Tank Access Door (Left)
ú 631AB Center Tank Access Door (Right)
ú 631BB Center Tank Access Door (Right)
ú 531CB Center Tank Access Door (Right)
ú
ú C. Procedure
ú
ú S 282-029
ú (1) For the area in the left center tank between the Side-of-Body rib
ú and rib No. 5, do these steps:
ú (a) Remove the applicable access panels for the left center tank
ú (AMM 28-11-02/401).
ú (b) Go into the left center tank (AMM 28-11-00/201).
ú (c) Do this task for all bonding jumpers between the Side-of-Body
ú rib and rib No. 5: Inspection of the Electrical Bonding
ú Jumpers in the Fuel System.
ú 1) Refer to drawings 343N4001, 344N4001 and 346N3001 for
ú bonding jumper locations.
ú (d) If access is not necessary for subsequent tasks, install the
ú access panels you removed (AMM 28-11-02/401).
ú
ú S 282-030
ú (2) For the area in the right center tank between the Side-of-Body rib
ú and rib No. 5, do these steps:
ú (a) Remove the applicable access panels for the right center tank
ú (AMM 28-11-02/401).
ú (b) Go into the right center tank (AMM 28-11-00/201).
ú (c) Do this task for all bonding jumpers between the Side-of-Body
ú rib and rib No. 5: Inspection of the Electrical Bonding
ú Jumpers in the Fuel System.
ú 1) Refer to drawings 343N4001, 344N4001 and 346N3001 for
ú bonding jumper locations.
ú (d) If access is not necessary for subsequent tasks, install the
ú access panels you removed (AMM 28-11-02/401).
ú
ú S 282-031
ú (3) For the area in the center section of the center tank between the
ú Side-of-Body ribs, do these steps:
ú (a) Remove the applicable access panels for the center section of
ú the center tank (AMM 28-11-02/401).
ú (b) Go into the center tank (AMM 28-11-00/201).
ú (c) Do this task for all bonding jumpers between the Side-of-Body
ú ribs: Inspection of the Electrical Bonding Jumpers in the Fuel
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
757 AMM 飞机维护手册 燃油 CHAPTER 28 - FUEL 1(15)
