B.
Equipment
NOTE: All equipment used to apply the sealing
____
compound must be clean. All equipment used
must be cleaned thoroughly after each sealing
job. Two-part compounds, those mixed with
activator, will harden. It is not easy to
clean the hardened compound from the
equipment.
(1)
Sealant removal and fairing tools (Fig. 801)
(2)
Paint brushes (commercially available)
(3)
Neoprene or rubber gloves (commercially
available)
(4)
Unsterilized gauze pads - all material must
contain less than 0.75 percent oil by carbon
tetrachloride extraction (commercially
available)
(5)
Pipe cleaners (commercially available)
(6)
Funnel brush (commercially available)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-11-00
ALL ú ú 01 Page 805 ú Sep 28/99
A
757
MAINTENANCE MANUAL
(7)
Sealing gun (commercially available)
(8)
J28006-1 or equivalent - Sealing tool (Fig. 802)
(9)
Click Patch Kit - SEMCO, 5454 San Fernando Rd., Glendale, CA 91203
(10)
Semkit - SEMCO, 5454 San Fernando Rd.,
Glendale, CA 91203
WARNING: MAKE SURE THE CAPACITY OF THE EXHAUST FAN
_______
IS MORE THAN THE CAPACITY OF THE AIR
BLOWER. THIS WILL MAKE SURE THERE IS A
GOOD FLOW OF AIR. THE CORROSION RESISTANT
FINISH IS A POISONOUS AND FLAMMABLE
COMPOUND WHICH CAN CAUSE INJURY TO PERSONS
OR DAMAGE TO EQUIPMENT.
(11)
Explosionproof air blower, with sufficient
flexible hose to reach all areas in the fuel
tanks. The capacity must be 90 to 100 cubic
feet per minute.
(12)
Explosionproof centrifugal exhaust fan,
capacity to be 125 to 150 cubic feet per
minute, and approximately 75 feet of 3-inch
diameter flexible suction hose, and sufficient
delivery hose to remove exhaust air out of the
hangar or work area
(13)
Rivet gun - Commercially available
(14)
Temporary Repair Tool - F70230 (Fig. 810)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 燃油 CHAPTER 28 - FUEL 1(117)
