757 AMM 飞机维护手册 燃油 CHAPTER 28 - FUEL 1(109)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 2)  Let the corrosion resistant finish dry for a minimum of 30
 minutes. 3) Apply a second thin layer like the first layer. 4) Make sure the corrosion resistant finish you applied makes
 an overlap with all adjacent topcoat applied before.
 (b)  For the spray gun procedure (recommended for large areas), do the steps that follow: 1) Set the spray gun to 40 psi air pressure and 5 to 10 psi
 fluid pressure. 2) Apply the corrosion resistant finish with a spray gun on the surface. 3) Let the corrosion resistant finish dry for a minimum of 30
 minutes. 4) Apply the second layer like the first layer. 5) Make sure the corrosion resistant finish you applied makes
 an overlap with all adjacent topcoat applied before.
 S 117-021
 (4)  Clean the equipment and tools after you apply the corrosion resistant finish (topcoat).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-11-00
 ú  ALL  ú
 ú ú  ú 01.101 ú  Page 724Sep 28/02 

A

757
MAINTENANCE MANUAL

 WARNING: DO NOT GET SOLVENTS IN YOUR MOUTH, OR YOUR EYES, OR ON
_______ YOUR SKIN. DO NOT BREATHE THE FUMES FROM SOLVENTS. SOLVENTS ARE HAZARDOUS MATERIALS. REFER TO PRODUCT MATERIAL SAFETY DATA SHEETS (MSDS) AND LOCAL REQUIREMENTS FOR PROPER HANDLING PROCEDURES.
 (a)  
Clean the equipment with solvent, Series 81 (AMM 20-30-81/201, SOPM 20-30-81) immediately after use.

 (b)  
Soak the brushes in solvent, Series 81 (AMM 20-30-81/201, SOPM 20-30-81) immediately after use.

 NOTE: Discard the brushes when the bristles become rigid.
____
 S 627-059
 (5) Cure the corrosion resistant finish. ~.............................................................................. | Table 702 | | Corrosion Resistant Finish Cure Time | ................................................................................ | CORROSION | CURE TIME | CURE TIME | CURE TIME | CURE TIME | | RESISTANT | BEFORE | BEFORE | BEFORE | BEFORE | | FINISH | FUEL EXPOSURE | TRAFFIC | ASSEMBLY | SEALING | | (BY MFGR.)| *[1] | | *[1] | *[2] | ................................................................................
 |Bostik West| 12 hours at  | 12 hours at  | 12 hours at  | Fig. 702  |
 |(BMS 10-20)| 65°F or above  | 65°F or above | 65°F or above  | *[3]  |
 |Type II)  | or Fig. 702  | or Fig. 702  | or Fig. 702  |  |
 |  | *[3]  | *[3]  | *[3]  |  |
 |  |  |  |  |  |
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 燃油 CHAPTER 28 - FUEL 1(109)